background image

English

   

|

   

3

Connector Function Guide

Pin Numbers for 
ISO Connectors

Cable Colour

Functions

External Power 
Connector
A-4

Yellow

Battery

A-5

Blue/White

Power Control

A-6

Orange/White

Dimmer

A-7

Red

Ignition (ACC)

A-8

Black

Earth (Ground) 
Connection

Speaker 
Connector
B-1

Purple

Rear Right (+)

B-2

Purple/Black

Rear Right (–)

B-3

Gray

Front Right (+)

B-4

Gray/Black

Front Right (–)

B-5

White

Front Left (+)

B-6

White/Black

Front Left (–)

B-7

Green

Rear Left (+)

B-8

Green/Black

Rear Left (–)

2

WARNING

Connecting the ISO Connector

The pin arrangement for the ISO connectors depends on 
the type of vehicle you drive. Make sure to make the proper 
connections to prevent damage to the unit.
The default connection for the wiring harness is described in 

1

 below. If the ISO connector pins are set as described in 

2

 

or 

3

, make the connection as illustrated.

Please be sure to reconnect the cable as shown 

2

 below to 

install this unit to the 

Volkswagen 

vehicles etc.

1

 (Default setting) The A-7 pin of the vehicle’s ISO 

connector is linked with the ignition, and the A-4 
pin is connected to the constant power supply.

Unit

Vehicle

A-7 Pin 

A-4 Pin

Ignition cable (Red)

Battery cable (Yellow) 

2

 The A-7 pin of the vehicle’s ISO connector is 

connected to the constant power supply, and the 
A-4 pin is linked to the ignition.

Unit

Vehicle

A-7 Pin 

A-4 Pin 

Ignition cable (Red)

Battery cable (Yellow) 

3

 The A-4 pin of the vehicle’s ISO connector is 

not connected to anything, while the A-7 pin is 
connected to the constant power supply (or both 
the A-7 and A-4 pins are connected to the constant 
power supply).

Unit

Vehicle

A-7 Pin 

A-4 Pin 

Ignition cable (Red)

Battery cable (Yellow) 

•  When the connection is made as in 

3

 above, the unit’s 

power will not be linked to the ignition key. For that reason, 
always make sure to turn off the unit’s power when the 
ignition is turned off.
To link the unit’s power to the ignition, connect the ignition 
cable (ACC...red) to a power source that can be turned on 
and off with the ignition key.

Connecting Wires to Terminals

B54-4700-00̲00̲English.indd   3

B54-4700-00̲00̲English.indd   3

08.10.28   11:55:49 AM

08.10.28   11:55:49 AM

Содержание KVT-524DVD









Отзывы: