12
installation
7. Screw the levelling feet fix board, bottom
hinge and levelling feet tightly on their
new position.
8. Stand the unit. Swap the position of the
wires between the left and right slots on
top of the unit.
9. Reverse the upper hinge and place it on
its new position. Fix the wire on the hinge.
Place the bottom hole of the door onto
the bottom hinge pin. Insert the upper
hinge pin into the upper hole of the door.
Tighten the pin securely. Screw the upper
hinge tightly.
10. Plug the electrical cord. Cover the upper
hinge with the upper hinge cover.
Ensure the door is aligned horizontally
and vertically, so that the seals are
closed on all sides before finally
tightening the pin.
KTF60X15/B17_IB_RC_190516_grace.indd 12
16/5/2019 10:03 AM
