11
installation
3. Remove the screws and loosen the wire
from the hinge. Remove the upper hinge.
Lift the door and place it on a padded
surface to prevent from being scratched.
4. Remove the stopper and stop block from
the bottom of the door and move them to
the opposite side. Screw tightly.
5. Remove both levelling feet, levelling feet fix
board and bottom hinge.
6. Swap the position of the levelling feet fix
board with the bottom hinge. On the bottom
hinge, move the position of the bottom hinge
pin to the other hole. Tighten the pin securely.
• Do not lay the unit flat as this may
damage the coolant system.
• During door reversal, when swapping
the position of the bottom hinge or
adjusting the levelling feet, tilt the unit.
Do not lay the unit flat.
KTF60X15/B17_IB_RC_190516_grace.indd 11
16/5/2019 10:03 AM
