ENGLISH
6
English
Caution:
• When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on
the opposite side such as a gasoline tank, brake pipe; or wiring harness, and be careful not to cause scratches or other damage.
• Install in a location that does not come in the way of driving, getting in or out of the vehicle and movement inside the ve-
hicle compartment.
• Fix the product firmly so that it will not be moved by vibrations or impacts during driving.
■
Fixing the subwoofer
Attach the fixtures A
4
to the speaker unit securely
using the machine screws
7
. Be careful so that the
connected cords do not get in between the speaker
unit and fixtures A
4
.
Attach the fixtures A
4
to the speaker unit securely
using the machine screws
7
. Be careful so that the
connected cords do not get in between the speaker
unit and fixtures A
4
.
Drill the pilot holes for ø 3.6 mm screws on the sheet
metal section of the vehicle , and attach the speaker
unit to the vehicle using the tapping screws
6
.
Drill the pilot holes for ø 3.6 mm screws on the sheet
metal section of the vehicle , and attach the speaker
unit to the vehicle using the tapping screws
6
.
Installation
Before fixing the speaker in its position, be sure to check the sound while it is connected preliminary.
■
Fixing the cord in place
Connect the 10-pin connector cord
2
and remote
control
1
to the speaker unit.
Fix the cords to the speaker unit with fixture B
5
and
fix in place with the machine screws
8
.
The subwoofer can be fixed in two ways. Select the optimum attaching position of fixture A
4
according to the subwoofer
installation location.
Fix the cord so that it will not
protrude from the side of the
p
speaker unit.
2
10-pin connector cord
1
Remote control
8
Machine screw x 2
5
Fixture B
7
Machine screw x 4
7
Machine screw x 4
4
Fixture A x 2
4
Fixture A x 2
1
1
2
2
6
Tapping screw x 4
6
Tapping screw x 4
Drill four pilot holes for
ø 3.6 mm screws.
Drill four pilot holes for
ø 3.6 mm screws.
4
4
Fixture A
4
4
Fixture A
Prohibition!
Caution:
This por tion becomes
slightly hotter than other
portions because it func-
tions as the radiator of
the heat generated by
the amplifier.
Caution:
This por tion becomes
slightly hotter than other
portions because it func-
tions as the radiator of
the heat generated by
the amplifier.
Fixing method A
Fixing method B
B61-1376̲1̲EN̲00̲KSC-SW11.indd 6
B61-1376̲1̲EN̲00̲KSC-SW11.indd 6
12.11.30 10:33:00 AM
12.11.30 10:33:00 AM
