operating instructions
GB-27
The display window shows the state of the dishwasher.
a) “-:--” means the unit is on stand by mode.
b) “H:MM” and not blinking means the unit is on pause.
c) “H:MM” and blinking means the unit is running.
at the end of a programme
At the end of a programme, the unit will sound and the display window
will return to “-:--”.
NOTE:
The condensation strip helps to prevent the risk of steam
damage to the worktop edging above the dishwasher, it is advis-
able to leave the door closed until you are ready to unload the
crockery. You may also open the dishwasher door fully until the
dishes and crockery are cool enough to unload. Do not leave the
door only partially open.
switching off the unit
For energy saving, please remember to switch the dishwasher off using
the “off” button. The dishwasher will continue to use electricity until it is
switched off with the “off” button.
If the dishwasher is not going to be used for a long period of time, e.g.
whilst on holiday, please disconnect the unit from the mains supply.
unloading the dishwasher
Allowing dishes to cool down before unloading is important because
dishes tend to break and chip more easily when they are hot. Therefore,
if you open the dishwasher door fully after switching off this will allow the
dishes to cool down much faster.
We suggest:
Unload the lower basket first, followed by the cutlery basket and then the
upper basket.
This will prevent water drops from the upper basket from falling on to the
dishes in the lower basket.
.
Kenwood KS474S_IB_GB_090828.indd27 27
28/08/09 12:25:53 PM
