24
EN
3
Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L)
: ____ meters (feet)
Distance to Center Speaker (C)
: ____ meters (feet)
Distance to Front Right Speaker (R)
: ____ meters (feet)
Distance to Surround Right (SR)
: ____ meters (feet)
Distance to Surround Back Right (SBR) : ____ meters (feet)
Distance to Surround Back (SB)
: ____ meters (feet)
Distance to Surround Back Left (SBL) : ____ meters (feet)
Distance to Surround Left (SL)
: ____ meters (feet)
Distance to Subwoofer (SW)
: ____ meters (feet)
• If you have selected
“SB NML/THXx1”
or
”SB LARGEx1”
,
“SBR” and “SBL” are not appeared but “SB” is appeared on the
Display.
4
Use the
5
/
∞
keys or MULTI
@
/
#
keys to select the speakers
and the MULTI CONTROL knob or MULTI
%
/
fi
keys to adjust
the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
L
SL
S
SB
SR
C
R
SP
MUTE
A B
CLIP
SW
LFE
STEREO
Indication in meters
• The allowable setting range is 0.03 to 9.14 meters (0.1 to 30.0
feet), adjustable in about 0.03 meters (0.1 foot) increments.
5
Repeat steps
4
to input the distance for each of the speakers.
6
Press the MEMORY/ENTER key or the ENTER key to return to
the “SP DISTANCE“ display.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
4
Exit the MANUAL SETUP mode.
1
Press the
5
/
∞
keys or MULTI
@
/
#
keys to select the “RE-
TURN“
L
R
SP
MUTE
A B
CLIP
SL
S
SB
SR
STEREO
2
Press the MEMORY/ENTER key or the ENTER key to return to
the “MANUAL SETUP“ display.
Preparing for surround sound
Other settings
1
Adjust the Subwoofer RE-MIX.
1
Press the
5
/
∞
keys or MULTI
@
/
#
keys to select the “SW RE-
MIX“ and press the MEMORY/ENTER key or the ENTER key.
2
Use the MULTI CONTROL knob or MULTI
%
/
fi
keys to select
the appropriate Subwoofer re-mix setting.
If
“SW RE-MIX ON”
is selected as the subwoofer re-mix setting,
the low frequencies are enhanced by adding the low frequencies
of other channels to the subwoofer channel depending on the
speaker setup.
1
SW RE-MIX ON :
Subwoofer re-mix setting mode to the
receiver is ON.
2
SW RE-MIX OFF :
Subwoofer re-mix setting mode to the
receiver is OFF.
• If Subwoofer is turned off or
“FRNT NML/THX”
is selected at the
Front Speaker setting, Subwoofer re-mix setting is not visible.
• By selecting
“SW RE-MIX OFF”
, the low frequencies will play
through the Front Speakers only.
This selection is preferred by THX.
3
Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
2
Select the CROSSOVER frequency.
CROSSOVER function is to adjust the receiver’s audio output charac-
teristics with the speakers’ characteristics which differs depending
on the size of the speakers. You will be able to enjoy a more natural
and dynamic sound experience even with small size speakers.
1
Press the
5
/
∞
keys or MULTI
@
/
#
keys to select the “CROSS
OVER“ and press the MEMORY/ENTER key or the ENTER
key.
•
CROSSOVER
function will not be available when “LARGE” is
selected for all the speakers in step
1
and “
SW RE-MIX OFF
”
is selected .
™
2
Use the MULTI CONTROL knob or MULTI
%
/
fi
keys to select
the CROSSOVER frequency.
1
FREQ. : 40Hz
2
FREQ. : 60Hz
3
FREQ. : 80Hz-THX
4
FREQ. : 100Hz
5
FREQ. : 120Hz
6
FREQ. : 150Hz
• If you have THX certified speakers, select
”FREQ.:80Hz-THX”
.
L
R
SP
MUTE
A B
CLIP
STEREO
3
Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
3
Adjust the distance between left and right Surround Back
speaker.
This mode is avaiable only when
“SB NML/THXx2“
or
“SB LARGEx2“
has been selected in Surround Back Speaker setting.
1
Press the
5
/
∞
keys or MULTI
@
/
#
keys to select the “SB
SPACING“ and press the MEMORY/ENTER key or the ENTER
key.
*5561/19-25/EN
05.7.16, 10:33 AM
24
