Kenwood KRF-V8080D, Инструкция по эксплуатации

Страница: 19 / 48

19
EN
ENGLISH
6
Input the distance to the speakers.
1
Press the
∧ ∧
∧ ∧ ∧ /
∨ ∨
∨ ∨ ∨
keys or
@
/
#
keys to select the SP DISTANCE
on setup displays and press the SETUP key again.
2
Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) : ____ feet (meters)
Distance to Center Speaker (C) : ____ feet (meters)
Distance to Front Right Speaker (R) : ____ feet (meters)
Distance to Surround Right (SR)
: ____ feet (meters)
Distance to Surround Back Right (SBR) : ____ feet (meters)
Distance to Surround Back (SB)
: ____ feet (meters)
Distance to Surround Back Left (SBL): ____ feet (meters)
Distance to Surround Left (SL)
: ____ feet (meters)
Distance to Subwoofer (SW) : ____ feet (meters)
• If you have selected “SB/SW AMP SB”, “SBR” and “SBL” are
not appeared but “SB” is appeared on the Display.
3
Use the
∧ ∧ ∧ ∧ ∧ / ∨ ∨ ∨ ∨ ∨
keys or
@
/
#
keys to select the speakers and the
MULTI CONTROL knob or Multi (
%
/
fi
) keys to adjust the
distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
L
SL S SB SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4
Repeat steps
3
to input the distance for each of the speakers.
5
Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
7
Adjust the LFE LEVEL (Low Frequency Effects).
1
Select the LFE LEVEL from the setup displays and press the
SETUP key again.
2
Use the MULTI CONTROL knob or Multi (
%
/
fi
) keys to adjust
the LFE LEVEL.
L
SL S SB SR
R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
PRO LOGIC
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3
Press the SETUP key again to return to main setup displays.
8
Select the display mode.
1
Press the
∧ ∧ ∧ ∧ ∧
/
∨ ∨ ∨ ∨ ∨
key or
@
/
#
keys to select the DISP MODE.
2
Press the SETUP key for the following displays:
1 DISP SELECTOR : Displays the current input selector.
2
DISP LISTEN : Displays the current listen mode.
Preparing for surround sound
Indication in feet Indication in meters
3
Use the MULTI CONTROL knob or Multi (
%
/
fi
) keys to select
the display mode.
SL S SB SR
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE PRO LOGIC
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
L R
DOLBY DIGITAL
4
Press the SETUP key again to accept the setting.
5
Use the
∧ ∧
∧ ∧
∧
key or
#
key to select EXIT.
L R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
SL S SB SR
PRO LOGIC
6
Press the SETUP key to exit the SET UP mode.
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
L
SL S SB SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG
A B CLIP
AU
LFE
CLIP CLIP
1
Use the Input Selector keys to select the source of which the
input level you want to adjust.
• You can store a separate input level for each input source.
2
Press the SOUND and
∧ ∧
∧ ∧
∧
/
∨ ∨
∨ ∨
∨
keys or
@
/
#
keys repeatedly until
the “INPUT” indication appears.
3
Use the MULTI CONTROL knob or Multi (
%
/
fi
) keys to adjust the
input level.
L
SL S SB SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
PRO LOGIC
• The adjustment mode is displayed for approximately 20 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
4
Press the SOUND key again to return to the input indication.
*5460/17-27/EN 04.3.5, 11:32 AM 19