Kenwood KRC-694/Y Скачать руководство пользователя страница 8

Страница: 8 / 26

KRC-694/Y

KRC-766

TEST MODE

1. How to enter the test mode

• While holding the Preset 1 and Preset 3 keys, reset the unit.

2. How to exit from the test mode

• Reset the unit, momentary power down, ACC OFF, power

OFF, and Panel detached.

• (Note) The test mode cannot terminated by Panel is fall

down.

3. Initial status in the test mode

• Sources

: All OFF.

• Display

: All segments are lit.

• Volume

: -10 dB (displayed as 30)

• Loudness

: OFF

• CRSC

: OFF regardless of the presence of

switching function.

• SYSTEM Q

: Flat.

• BEEP

: When pressing any keys, the buzzer

generates a beep at any time.

• DISPLAY TYPE : TYPE A

4. RDS automatic measurement

• An addition to disposal of substitute for visual check PS

display as usual production lines.

• P-CON terminal is OFF by force, when received the PS

data and in case of corrobaration PS display is "RDS_TEST".

(“_” is mean blank.)

• This disposal is test mode only.

• P-CON is switching the source or return with power on

→

off.

5. Special display in Tuner mode

When any of the following messages is displayed in Tuner

mode, the front end may be abnormal.

• "TNE 2P NG": The EEPROM is set to the default (unsta-

ble values) because the F/E was shipped without passing

through the adjustment process, etc.

• "TNCON NG": Communication with the F/E is not possible.

6. Forced switching of K3I

• Each press of the Preset 6 key in Tuner mode should

switch K3I from AUTO

→

Forced Wide

→

Forced Middle

→

Forced Narrow

→

AUTO. The initial status is AUTO

and the display shows these modes as follows.

• AUTO

: FMA

• Forced Wide

: FMW

• Forced Middle : FMM

• Forced Narrow : FMN

7. Test mode specifications of the cassette

receiver

• BLANK SKIPP :OFF

8. Audio-related specifications

• A short press of the Q key initiates the audio adjustment

mode.

• Pressing the

❉

key on the remote initiates the audio

adjustment mode.

• Fader is selected to the initial item.

• Continuous holding of a remote control key is inhibited.

• Bass, Middle and Treble are adjusted in 3 steps of -8/0/+8

with the Track Up/Down keys.

• Balance is adjusted in 3 steps of L15/0/R15 with the Track

Up/Down keys.

• Fader is adjusted in 3 steps of F15/0/R15 with the Track

Up/Down keys.

• Volume Offset is adjusted in 2 steps of -8/0 with theTrack

Up/Down keys.

9. Menu-related specifications

• A short press of the MENU key initiates the Menu mode.

Except, tape source is usually press and hold 1 second to

enter the menu mode and short press initiates turn over.

• Pressing the DNPP/SBF key on the remote initiates the

Menu mode.

• Continuous holding of a remote control key is inhibited.

• Contrast is adjusted in 3 steps of 0/5/10(5x7dot), 0/4/7

(14seg) with the Track Up/Down keys.

10. Backup current measurement

• When the unit is reset while ACC is OFF (i.e. by turning

Back-Up ON), the MUTE terminal goes OFF in 2 seconds

in place of 15 second.

www. xiaoyu163. com

QQ 376315150

TEL 13942296513

TEL 13942296513 QQ 376315150 892498299

Содержание KRC-694/Y



























Результаты поиска

Содержание KRC-694/Y

Отзывы:

Похожие инструкции для KRC-694/Y

Бренды по названию

Популярные бренды

Kenwood KRC-694/Y, Руководство по обслуживанию

Результаты поиска

Содержание KRC-694/Y

Отзывы:

Похожие инструкции для KRC-694/Y

Бренды по названию

Популярные бренды