6
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
HD Radio™ tuner
(for
)
Search for a station
1
Press
repeatedly to select HD RADIO.
2
Press
repeatedly (or press
/
on
RC-406) to select FM1/ FM2/ FM3/ AM.
3
Press
S
/
T
(or press
S
/
on RC-406) to search
for a station or channel.
•
To change the searching method for
S
/
T
: Press
repeatedly.
AUTO1
: Automatically search for a station or channel.
AUTO2
: Search for a preset station or channel.
MANUAL
: Manually search for a station or channel.
•
To store a station or channel
: Press and hold one of the
number buttons (
1
to
6
).
•
To select a stored station or channel
: Press one of the number
buttons (
1
to
6
) (or press one of the number buttons (
1
to
6
) on
RC-406).
Direct Access Tuning (using RC-406)
1
Press
DIRECT
to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press
to search for a station or channel.
• To cancel, press
or
DIRECT
.
• If no operation is done for 10 seconds after step
2
, Direct Access
Tuning is automatically canceled.
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio multicast channels....
Press
S
/
T
to select your desired channel (HD1 to HD8).
“LINKING” appears while linking to a multicast channel.
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
TUNER SETTING
IF BAND
AUTO
: Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.) ;
WIDE
: Subjects to interference noises
from adjacent FM stations, but sound quality will not be degraded and the stereo
effect will remain.
AUTO MEMORY
YES
: Automatically starts memorizing 6 stations with good reception. ;
NO
: Cancels.
•
Selectable only if [
NORMAL
] is selected for [
PRESET TYPE
]. (
5
)
RECEIVE MODE
Sets the receive mode of the HD Radio receiver.
AUTO
: Automatically tunes to analog broadcast when there is no digital
broadcast. ;
DIGITAL
: Tunes in to digital broadcast only. ;
ANALOG
: Tunes in to
analog broadcast only.
CLOCK
TIME SYNC
ON
: Synchronizes the unit’s time to the Radio Broadcast Data System station
time. ;
OFF
: Cancels.
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
JS_KWD_KMM_BT515HD_KN_EN_2.indd 6
JS_KWD_KMM_BT515HD_KN_EN_2.indd 6
7/10/2015 4:24:10 PM
7/10/2015 4:24:10 PM
