26
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Warning
•
The unit can only be used with a 12 V DC power supply, negative ground.
•
Disconnect the battery’s negative terminal before wiring and mounting.
•
Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire
(black) to prevent a short circuit.
•
Insulate unconnected wires with vinyl tape to prevent a short circuit.
•
Be sure to ground this unit to the car’s chassis again after installation.
Caution
•
For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.
•
Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during
and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.
•
Do not connect the
[
wires of speakers to the car chassis or Ground wire (black), or connect
them in parallel.
•
Mount the unit at an angle of less than 30º.
•
If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)
to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned
on and off by the ignition key.
•
Keep all cables away from heat dissipate metal parts.
•
After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are
working properly.
•
If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old
fuse with one that has the same rating.
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
[
terminal of the car battery.
2
Connect the wires properly.
See Wiring connection. (
28, 29
)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the
[
terminal of the car battery.
5
Reset the unit. (
3
)
INSTALLATION / CONNECTION
Bluetooth
Version
Bluetooth Ver.2.1+EDR / Bluetooth 3.0
Frequency Range
2.402 GHz — 2.480 GHz
Output Power
+4 dBm (MAX), 0 dBm (AVE) Power Class 2
Maximum Communication Range
Line of sight approx. 10 m (32.8 ft)
Profile
HFP (Hands-Free Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Audio
Maximum Output Power
50 W × 4
Full Bandwidth Power
22 W × 4 (at less than 1 % THD)
Speaker Impedance
4 Ω — 8 Ω
Tone Action
Bass:
200 Hz ±8 dB
Middle: 2.5 kHz ±8 dB
Treble: 12.5 kHz ±8 dB
Preout Level/Load (USB)
2 500 mV/10 kΩ
Preout Impedance
≤ 600 Ω
General
Operating Voltage
14.4 V (10.5 V — 16 V allowable)
Maximum Current Consumption
10 A
Operational Temperature Range
0°C — +40°C
Installation Size (W × H × D)
182 mm × 53 mm × 107 mm
(7-3/16" × 2-1/16" × 4-3/16")
Weight
: 0.62 kg (1.37 lbs)
: 0.66 kg (1.46 lbs)
Subject to change without notice.
SPECIFICATIONS
JS_KWD_KMM_BT312U_KN_EN_5.indd 26
JS_KWD_KMM_BT312U_KN_EN_5.indd 26
25/9/2014 7:53:45 AM
25/9/2014 7:53:45 AM
