12
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Make a call using voice recognition
1
Press and hold
to activate the voice recognition of the
connected phone.
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer
to the instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function
of iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (
1
to
6
).
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select [
CALL HISTORY
], [
PHONE BOOK
], or
[
NUMBER DIAL
], then press the knob.
3
Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the
phone number.
4
Press and hold one of the number buttons (
1
to
6
).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [
NUMBER DIAL
] in
step
2
and store a blank number.
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (
1
to
6
).
3
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
Other settings
1
Press the volume knob to enter
[FUNCTION
].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
*
” appears in front of the device name when connected.
•
You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
AUDIO SELECT
DEVICE DELETE
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select [
YES
] or [
NO
], then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the PIN code.
3
Press the volume knob to confirm.
RECONNECT
ON
: The unit automatically reconnect when the last connected Bluetooth
device is within range. ;
OFF
: Cancels.
AUTO PAIRING
ON
: The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/ Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device, this
function may not work. ;
OFF
: Cancels.
INITIALIZE
YES
: Initializes all the Bluetooth settings (including stored pairing, phonebook,
and etc.). ;
NO
: Cancels.
JS_KWD_KMM_BT302_EN_EN_2.indd 12
JS_KWD_KMM_BT302_EN_EN_2.indd 12
12/10/2015 5:15:16 PM
12/10/2015 5:15:16 PM
