Kenwood KMM-BT302, Инструкция по эксплуатации

Страница: 13 / 72

ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Default: XX
MIC GAIN –10 — +10 ( –4 ): The sensitivity of the microphone
increases as the number increased.
NR LEVEL –5 — +5 ( 0 ): Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL –5 — +5 ( 0 ): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
Answer incoming call automatically
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [
SETTINGS
], then press the
knob.
3
Turn the volume knob to select [ AUTO ANSWER ], then press
the knob.
4 Turn the volume knob to select an item, then press the
knob.
1 to 30 (in seconds)/ OFF (default)
5
Press and hold to exit.
To return to the previous setting item, press .
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your mobile
phone has the feature.
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated
or follow the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .
CALL HISTORY (Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
• “I” indicates call received, “O” indicates call made, “M” indicates call missed.
• Press
DISP
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2 Press the volume knob to call.
PHONE BOOK (Applicable only if the phone supports PBAP)
1
Turn the volume knob quickly to enter alphabet search mode (if the phonebook
contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1 * ), press
J
/
K
.
• To select the desired first letter, turn the volume knob or press
S / T
, then
press the knob.
Select “1” to search with numbers and select “ * ” to search with symbols.
2 Turn the volume knob to select a name, then press the knob.
3
Turn the volume knob to select a phone number, then press the knob to call.
•
The phonebook of the connected phone is automatically transferred to the unit
when pairing.
•
Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other),
GE (general)
•
This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as
“U”.)
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2
Press
S
/
T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control the
phone functions.
(
12, Make a call using voice recognition )
BATT LOW / MID / FULL
*
: Shows the strength of the battery.
NO SIGNAL / LOW / MID / MAX
*
: Shows the strength of the current received signal.
*
Functionality depends on the type of the phone used.
JS_KWD_KMM_BT302_EN_EN_2.indd 11 JS_KWD_KMM_BT302_EN_EN_2.indd 11 12/10/2015 5:15:16 PM 12/10/2015 5:15:16 PM