
ENGLISH
15
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
About Android device
•
This unit supports Android OS 4.1 and above.
•
Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0.
•
If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via
AOA 2.0 as priority.
About Pandora
•
Pandora is only available in certain countries.
For more information, visit <http://www.pandora.com/legal>.
•
Because Pandora is a third-party service, the specifications are subject to change without prior notice.
Accordingly, compatibility may be impaired, or some or all of the services may become unavailable.
•
Some functions of Pandora cannot be operated from this unit.
•
For issues using the application, please contact Pandora at [email protected].
Change the display information
Each time you press
DISP
, the display information changes.
•
If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station
name, playing time) appears.
Source name
Display information
STANDBY
Source name Clock (back to the beginning)
TUNER
Frequency Clock (back to the beginning)
(For FM Radio Data System stations only)
Station name Radio text Radio text+ Title/Artist Frequency Clock
(back to the beginning)
USB
(For MP3/WMA/WAV/FLAC files)
Music title/Artist Album title/Artist Folder name File name Playing time
Clock (back to the beginning)
iPod or
ANDROID
When
[MODE OFF]
/
[BROWSE MODE]
is selected.
( 8)
Music title/Artist Album title/Artist Playing time Clock (back to the beginning)
PANDORA
Station name Shared/Radio station Music title Artist Album title
Playing time Clock (back to the beginning)
AUX
Source name Clock (back to the beginning)
REFERENCES
Warning
•
The unit can only be used with a 12 V DC power supply, negative ground.
•
Disconnect the battery’s negative terminal before wiring and mounting.
•
Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis
or Ground wire (black) to prevent a short circuit.
•
Insulate unconnected wires with vinyl tape to prevent a short circuit.
•
Be sure to ground this unit to the car’s chassis again after installation.
Caution
•
For safety’s sake, leave wiring and mounting to professionals. Consult the car
audio dealer.
•
Install this unit in the console of your vehicle. Do not touch the metal parts of
this unit during and shortly after use of the unit. Metal parts such as the heat
sink and enclosure become hot.
•
Do not connect the
[
wires of speakers to the car chassis or Ground wire
(black), or connect them in parallel.
•
Mount the unit at an angle of less than 30º.
•
If your vehicle wiring harness does not have the ignition terminal, connect
Ignition wire (red) to the terminal on the vehicle’s fuse box which provides
12 V DC power supply and is turned on and off by the ignition key.
•
Keep all cables away from heat dissipate metal parts.
•
After the unit is installed, check whether the brake lamps, blinkers, wipers,
etc. on the car are working properly.
•
If the fuse blows, first make sure the wires are not touching car’s chassis, then
replace the old fuse with one that has the same rating.
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
[
terminal of the car battery.
2
Connect the wires properly.
See Wiring connection.
( 17)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
( 16)
4
Connect the
[
terminal of the car battery.
5
Reset the unit. ( 3)
INSTALLATION/CONNECTION
JS_KWD_KMM_203_MN_EN_4.indd 15
JS_KWD_KMM_203_MN_EN_4.indd 15
21-Sep-16 11:49:30 AM
21-Sep-16 11:49:30 AM