manualshive.com logo in svg

Kenwood KMD-6527, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood KMD-6527 Скачать руководство пользователя страница 4

4

   

|

   

English

Reset button

Safety precautions

NOTE

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  If the unit fails to operate properly, press the Reset 

button. The unit returns to factory settings when 
the Reset button is pressed. If the unit still fails to 
operate properly after the Reset button has been 
pressed, contact your local KENWOOD dealer for 
assistance.

•  Press the reset button if the disc auto changer fails 

to operate correctly. Normal operation should be 
restored.

•  The illustrations of the display and the panel 

appearing in this manual are examples used to 
explain more clearly how the controls are used. 
Therefore, what appears on the display in the 
illustrations may differ from what appears on 
the display on the actual equipment, and some 
of the illustrations on the display may represent 
something impossible in actual operation.

Lens Fogging

In cold climates, there may be a period after you 
turn on your vehicle’s heater when the lens that 
guides the laser beam used in your MD player fogs 
up. If this happens, you cannot play mini discs. Take 
out discs and the fogging will disappear. If it does 
not return to normal after several hours, contact 
your Kenwood dealer.

About CD players/disc changers 
connected to this unit

KENWOOD disc changers/ CD players released in 
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood 
dealer for connectable models of disc changers/ 
CD players.
Note that any KENWOOD disc changers/ CD players 
released in 1997 or earlier and disc changers made 
by other makers cannot be connected to this unit.
Unsupported connection may result in damage.
Setting the "O-N" Switch to the "N" position for the 
applicable KENWOOD disc changers/ CD players.
The functions that can be used and the information 
that can be displayed will differ depending on the 
models being connected.

•  You can damage both your unit and the CD changer if 

you connect them incorrectly.

LX-bus connection

The LX AMP and the sensor unit cannot be 
connected simultaneously.
You must connect any of them at a time.
(The power supply does not turn ON if you have 
connected both of them.)

B64-2768-00̲U.S.Indd   4

2003.11.21, 02:44:14 PM

Содержание KMD-6527









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды