GB-8
Carefully lift the main filter out.
(Fig )
Carefully lift the fine filter out with
care. (Fig 3)
Rinse all the filters under running
water, then refit all filters in the fol-
lowing order.
Carefully refit the fine filter with
care. (Fig 3)
Carefully refit the main filter. ( Fig
)
Gently unscrew the course filter
in a clockwise direction. (Fig 1 on
Page 7)
NOTE
: Do not over tighten the filters.
Put the filters back in the filter cylinder
in sequence securely. Otherwise the
residue could get into the system and
cause a blockage.
WARNING!
NEVER
use the dishwasher without fil-
ters in place. Improper replacement of
the filter may reduce the performance
levels of the appliance and damage
dishes and utensils.
•
•
•
•
•
•
3
4
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked and
cleaned regularly. (Fig 1)
Use a pointed object, eg. a cocktail
stick, to loosen food particles in
the spray arms’ jets.
•
spray arms
1
Filter cylinder without the filters
NOTE
: Do not attempt to remove the spray arms.
Kenwood KDW8ST2A_IB_GB_Final_09028 28
28/08/09 12:31:17 PM
