Kenwood KDW60S12, Руководство по установке

Страница: 10 / 36

10
installation
Failure to attach the condensation strip
could result in damage to the underside
of your worktop!
4. The condensation strip must be fitted
to the underside of the worktop above
your dishwasher to help protect it against
and reduce potential liability moisture.
Its purpose is to protect your worktop’s
underside from steam rising from the
dishwasher.
Remove the backing paper from the
condensation strip.
3. Do not connect the unit to the mains socket
before installation. Ensure you are not
installing the unit right in front of the mains
socket. This is to avoid potential damage to
the back of the unit.
6. The worktop can be removed by removing
the fixing screws located at the rear of the
dishwasher. After removing the screws, lift
and push the worktop forward to release
the lugs from the front section of the
dishwasher. The polystyrene block and the
lugs should be saved for future use.
ON
OFF
Ensure the surface is clean prior to
sticking the condensation strip to the
underside of the worktop.
Leave some space
Stick the Condensation Strip
under the worktop, where you
want to install the dishwasher.
Remove
Remove
Unscrew
Remove
5. Stick the condensation strip to the
underside of the worktop.