20
|
KDV-S221P
M4 X 5mm
REMO
TE
M4 X 5mm
Connecting Wires to Terminals
Backing paper
Remote Control Sensor
2
To Cigarette
Lighter Socket
Attaching Remote Control Sensor
1 Remove the backing paper from the Velcro tape on the
back of the Remote Control Sensor.
2 After wiping off the dirt or oil from the attachment location,
attach the Remote Control Sensor.
⁄
• Wipe off the dirt or oil from the surface to which the Sensor is
attached.
• Avoid locations under direct sunlight or near the TV monitor where
signals from the remote controller are not received easily.
• You can change the direction of the remote control sensor cable.
DVD Player back view
Power Cable
1
Cigarette Lighter Plug
Fuse (5A) built in
Ground wire
7
(Black)
-
(To car chassis)
Semusu Screw
4
(M4 x 5 mm)
Battery
¤
• Connect the power cable
1
to the DVD player first, and
connect it to the cigarette lighter socket last. Connecting it
to the cigarette lighter socket first may blow the fuse.
AV Cable
8
TV Monitor
(Optional Accessory)
Video output (Yellow)
Audio left output (White)
Audio right output (Red)
Digital output
KDV-S221P.indb 20
KDV-S221P.indb 20
07.5.25 5:32:21 PM
07.5.25 5:32:21 PM