Kenwood kdc-z939, Инструкция по эксплуатации

Страница: 19 / 52

• The Dual Zone System can be used with the optional Auxiliary
input sources shown below.
- KCA-S210A
- CA-C1AX
- CD changer with an Auxiliary input function installed.
The Dual Zone System cannot be used in the built-in Auxiliary
input.
• This function can be used in Auxiliary input source.
• The front channel and rear channel can be set to be the internal
source or the Auxiliary input source. Refer to the <Dual Zone
System Setting> (page 36).
Makes the sound different for the front channel and rear
channel.
One side of both the front and rear channels outputs the internal
source sound, and the other side outputs the Auxiliary input
source sound.
Press the [S.A] button for at least 1 second.
Each time the button is pressed for at least 1 second Dual Zone
System switches ON or OFF.
When it’s ON, "Zone 2 ON" is displayed.
• When the Dual Zone System is ON, there is no Auxiliary input
source channel audio control or other effect.
• When the Dual Zone System is being used the internal source
channel can't be used with an External disc source.
• When you set the Dual zone system to ON while the non-fading
preout is switched ON, the sound of the non-fading preout isn’t
output.
Dual Zone System
The audio system automatically mutes when a call comes in.
When a call comes in
" (CALL)" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The " (CALL)" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The " (CALL)" display disappears and the audio system
comes back ON.
TEL Mute
— 19 —
KDC-Z939(M)_U.S_r2 02.3.11 11:51 AM Page 19