Kenwood kdc-z939, Инструкция по эксплуатации

Страница: 12 / 52

In Tuner source
Character information display part b Display
Information Display
Program Service name or Frequency "PS"
Radio text "R-TEXT"
Date & Clock "DATE+CLOCK"
(Only when Display Type is "Display Type B")
Date
"DATE"
Blank (Only when Display Type is "Display Type A")
The Frequency is displayed during Program Service name
reception
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
Character information display part
c
Display
Information Display
Spectrum Analyzer & Clock "S/ANA+CLOCK"
Radio text "R-TEXT"
Blank
Date
"DATE"
Date & Clock "DATE+CLOCK" or "CLOCK"
The band display is always displayed on the
a
part display.
Character information display part
c
cannot display the same
information as character information display part b .
When Display Type is set to "Display Type A" or "Display Type
B", the displayed contents are changed.
"Display Type A"
"Display Type B"
1
Select the Display Type
Press the [DISP] button.
2
Enter Display Control mode
Press the [S.A] button.
"Display Control" is displayed.
3
Switch character information display part
b
Press the [FM] or [AM] button.
Switch character information display part c
(Only when Display Type is "Display Type A")
Press the [
4
] or [
¢
] button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.
4
Exit Display Control mode
Press the [S.A] button.
Display switching part for "Display Type A" and
"Display Type B"
General features
— 12 —
English
Character information display part
a
Character information display part
b
Character information display part
c
Character information display part a
Character information display part
b
KDC-Z939(M)_U.S_r2 02.3.11 11:51 AM Page 12