manualshive.com logo in svg

Kenwood KDC-Z737, Инструкция по эксплуатации, Страница: 36 / 40

Поделиться
Скачать
Kenwood KDC-Z737 Скачать руководство пользователя страница 36

English

— 36 —

?

The Security Code item isn’t displayed in the Menu System.

32

✔

The Security Code function is already activated.

☞

When the Security Code function is activated it isn’t displayed in
the menu items.

?

The Touch Sensor Tone doesn’t sound.

34

✔

The preout jack is being used.

☞

The Touch Sensor Tone can’t be output from the preout jack.

?

Even though the vehicle light switch is turned ON, the unit’s display
won’t dim.

36

✔

The dimmer wire isn’t connected.

☞

Connect the dimmer wire correctly.

?

The Dimmer function doesn’t work. 

38-1

✔

The Dimmer wire isn’t connected correctly.

☞

Check the Dimmer wire connection.

?

AUX cannot be selected. 

103

✔

<Built-in Auxiliary input Setting> is turned off.

☞

Refer to the <Built-in Auxiliary input Setting> (page 28) in the
menu setting and turn on the <Built-in Auxiliary input Setting> .

Tuner source

?

Radio reception is poor.

39

✔

The car antenna is not extended.

☞

Pull the antenna out all the way.

✔

The antenna control wire is not connected.

40

☞

Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.

?

The desired frequency can’t be entered with the Direct Access
Tuning.

41

✔

A station that can’t be received is being entered.

☞

Enter a station that can be received.

✔

You’re trying to enter a frequency with a 0.01 MHz unit.

42

☞

What can be designated in the FM band is to 0.1 MHz.

Disc source

?

"AUX" is displayed without achieving External disc control mode.

50 

✔

O-N switch is set to "O" side. 

☞

Set the switch to "N" side. 

✔

Unsupported disc changer is connected.

51 

☞

Connect the supported disc changer. (page 3)

?

The specified disc does not play, but another one plays instead.

52

✔

The specified CD is quite dirty.

☞

Clean the CD.

✔

The CD is upside-down.

53

☞

Load the CD with the labeled side up.

✔

The disc is loaded in a different slot from that specified.

54

☞

Eject the disc magazine and check the number for the specified
disc.

✔

The disc is severely scratched.

55

☞

Try another disc instead.

?

The specified track will not play.

58 

✔

Random play or magazine random play has been selected. 

☞

Turn off random play or magazine random play. 

?

Track repeat, disc repeat, track scan, random play, and magazine
random play start by themselves.

59 

✔

The setting is not canceled. 

☞

The settings for these functions remain on until the setting to off
or the disc ejected, even if the power is turned off or the source
changed. 

Troubleshooting Guide

KDC-Z838/Z737_U.S_r2  02.11.15  10:07 AM  Page 36

Содержание KDC-Z737









































Отзывы:

Нет отзывов