— 49 —
Troubleshooting Guide
Mecha Error: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.
E99
➪
Check the disc magazine. And then press the reset
button on the unit. If the "Mecha Error" code does
not disappear, consult your nearest service center.
Hold Error:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.
E0d
➪
Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
NO NAME:
• Attempted to display DNPS during the CD play
having no disc names preset.
E51
• Attempted to display SNPS during the receiving
session of the station having no station name
preset.
E50
NO TITLE:
Attempted to display the disc title or track title while
the MD having no MD title is being played.
E53
NO TEXT:
• Attempted to display the disc text or track text
while the CD having no CD text is being played.
E54
• Attempted to display text during reception of the
station that isn't sending text data.
E55
• Attempted to display the ID3 tag or contents
description while the MP3/WMA having no ID3 tag
or contents description is being played.
E52
Waiting:
Radio text data is being received.
E56
Load:
Discs are being exchanged in the Disc changer.
E57-1
Reading:
The unit is reading the data on the disc.
E57-2
NO ACCESS: After setting it in the Disc Changer, DNPP was done
without having it been played at least 1 time.
E58
The messages shown below display your systems
condition.
Eject:
No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.
E01
➪
Load the disc magazine properly.
No CD in the unit.
➪
Insert the CD.
No Disc:
No disc has been loaded in the disc magazine.
E02
➪
Load a disc into the disc magazine.
TOC Error:
No disc has been loaded in the disc magazine.
E04
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
➪
Clean the CD and load it correctly.
E-05:
The CD is upside-down.
E05
➪
Load the CD correctly.
Blank Disc:
Nothing has been recorded on the MD.
E10
No Track Disc: No tracks are recorded on the MD, although it has a
title.
E11
No Music Data:
Media was played that doesn’t have data recorded
that the unit can play.
E15
➪
Use media that has data recorded that the unit can
play.
Files for picture downloading only are recorded in
CD-R/CD-RW.
No Panel:
The faceplate of the slave unit being connected to
this unit has been removed.
E30
➪
Replace it.
E-77:
The unit is malfunctioning for some reason.
E77
➪
Press the reset button on the unit. If the "E-77"
code does not disappear, consult your nearest
service center.
Содержание KDC-X959
Страница 52: ......
