18
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Symptom
Remedy
Bluetooth®
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit.
( 3)
Pairing cannot be made.
• Make sure you have entered the same PIN code to both the unit and Bluetooth
device.
• Delete pairing information from both the unit and the Bluetooth device, then
perform pairing again.
( 10)
“DEVICE FULL” appears.
The number of registered devices has reached its limit. Retry after deleting an
unnecessary device.
( 13, DEVICE DELETE)
Echo or noise occurs.
• Adjust the microphone unit’s position.
( 10)
• Check the
[ECHO CANCEL]
setting.
( 11)
Phone sound quality is poor.
• Reduce the distance between the unit and the Bluetooth device.
• Move the car to a place where you can get a better signal reception.
• Voice calling method is not
successful.
• “N/A VOICE TAG” appears.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you speak the name.
• Make sure the same voice as the registered voice tag is used.
“NOT SUPPORT” appears.
The connected phone does not support Voice Recognition feature.
• “NO ENTRY” appears.
• “NO PAIR” appears.
There is no registered device connected/found via Bluetooth.
“ERROR” appears.
Try the operation again. If “ERROR” appears again, check if the device supports
the function you have tried.
“NO INFO” appears.
Bluetooth device cannot get the contact information.
Sound is being interrupted or
skipped during playback of a
Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the unit.
The connected Bluetooth
audio player cannot be
controlled.
• Check whether the connected Bluetooth audio player supports Audio/Video
Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
• “HF ERROR XX” appears.
• “BT ERROR” appears.
Reset the unit and try the operation again. If this does not solve the problem,
consult your nearest service center.
TROUBLESHOOTING
SPECIFICATIONS
Tuner
FM
Frequency Range
87.5 MHz — 108.0 MHz
(50 kHz space)
87.9 MHz — 107.9 MHz
(200 kHz space)
Channel Space Selection
50 kHz/ 200 kHz
Usable Sensitivity
(S/N = 26 dB)
8.2 dBf (0.71 μV/75 Ω)
Quieting Sensitivity
(DIN S/N = 46 dB)
17.2 dBf (2.0 μV/75 Ω)
Frequency Response
30 Hz — 15 kHz (±3 dB)
Signal-to-Noise Ratio
64 dB (MONO)
Stereo Separation
40 dB (1 kHz)
MW/ SW1/ SW2
Frequency
Range
Band 1
(MW)
531 kHz to 1 611 kHz
(9 kHz space)
530 kHz to 1 700 kHz
(10 kHz space)
Band 2
(SW1)
2 940 kHz to 7 735 kHz
(5 kHz space)
Band 3
(SW2)
9 500 kHz to 10 135 kHz/
11 580 kHz to 18 135 kHz
(5 kHz space)
Channel Space
Selection
Band 1
9 kHz/10 kHz
Band 2/ 3
5 kHz
Usable
Sensitivity
(S/N = 20 dB)
MW
29.0 dBμ (28.2 μV)
SW
30 dBμ (32 μV)
JS_KWD_KDC_X700BT_MWM0_01_EN.indd 18
JS_KWD_KDC_X700BT_MWM0_01_EN.indd 18
9/12/2013 3:42:04 PM
9/12/2013 3:42:04 PM
