Kenwood KDC-X597, Руководство по обслуживанию

Страница: 15 / 58

(No.WA049<Rev.001>)15/26
4.2.6.3 Status display during adjustment
4.2.6.4 Operation of return to TUNER Test Mode
4.2.6.5 BAND switch list
4.2.7 USB Test Mode Specification
Status display during iPod IC check.
4.2.8 Sirius XM Test Mode Specification
Upon entering production mode, change to SXM source to enter Sirius XM test mode.
This test mode is to check output and switching of SXV100’s internal tone generator
Communication between Host & SXV100 will be checked.
If the result is OK, a 1kHz signal from the internal tone generator of SXV100 will be outputted.
This test mode will start from Channel 0 automatically.
When the unit receives channel other "Channel 0", normal display rule should apply.
4.2.9 CD Test Mode Specification
It shall be the same as normal RST start in other than the below setting.
Status Display content Details
Adjustment success
When the adjustment value write-in to E2PROM
(IC771 on X34) has been completed.
xx: Level offset value (HEX)
P-CON is turned Off at the same time when this
adjustment succeed.
Upon exit, P-CON still remain OFF.
Adjustment failure
When the adjustment value write-in to E2PROM
(IC771 on X34) has failed.
P-CON remain turn On at the same time when this
adjustment fail.
Upon exit, P-CON still remain ON.
J D A : K O x x
J D A G N
Operation Display content Details
RETURN Mode release Return to TUNER Test Mode
Type BAND1 BAND2 BAND3 BAND4 BAND5 BAND6 Details
K (1)FM1 FM2 FM3 (2)AM - - (1)
→
(2)
→
(1)...
M (1)FM1 FM2 FM3 (2)MW (3)SW1 (4)SW2 (1)
→
(2)
→
(3)
→
(4)
→
(1)...
Status Display content Details
Information display iPod verification
IC mount status display
iPod verification IC mount status display
Blank: Verifying
NG: Verification IC not mounted
Upon source change to USB source or USB
device plug in:
In the case of verifying: show iPod : Blank.
In the case of NG: always show iPod :NG even
during No Device or playback.
In the case of OK: change back to normal dis-
play (No device, normal playback display).
o i P d :
o i P d : N G
Operation Display content Details
RETURN
(Toggle)
Left & Right Channel
########: 8 characters Radio ID.
Output 1kHz signal for Left/ Right channel.(Default)
Left Channel Output 1kHz signal for Left channel.
Right Channel Output 1kHz signal for Right channel.
Off No signal output (same as normal operation).
# # # # # # # #
L E F T
R I G H T
O F F
Content Details
Playback track from top No.9
Default for Display mode Play time