18
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Other Functions
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken
with you, helping to deter theft.
Removing the Faceplate
1
Press the Release button.
Drop open the faceplate.
2
Drawing the faceplate to left side pull it to
forward and remove it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
1
Align the shaft on the unit with the depression
on the faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use
the unit.
⁄
• Do not operate this unit while downloading to prevent
data from being damaged.
• The number of files that can be downloaded.
- Downloaded movie: 1 file
- Wallpaper: 1 file
• When a new wallpaper is downloaded, it is overwritten
to the currently downloaded wallpaper.
There is no way to delete the downloaded pictures.
• The downloaded pictures can be used for display.
“DISP” > “GRAPH” of <Function Control> (page 6)
• When you cannot download the pictures to this unit,
there may be a problem with the CD-R/CD-RW/USB
device write method.
Refer to the URL
http://www.kenwood.net-disp.com
.
PICTURE ENGINE
Picture Engine is an application software
distributed from Kenwood's official website.
Utilizing this software, you can create an original
still image file. As for the download of application,
please browse “
http://www.kenwood.net-disp.
com/
” for directions.
Demonstration mode setting
Turning the demonstration mode ON/OFF.
1
Select Demonstration item during Menu mode
Select the “DEMO Mode” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between “ON” and “OFF”.
3
Exit Demonstration mode
Press the [FNC] button.
B64-4049-00̲00̲E̲English.indd 18
B64-4049-00̲00̲E̲English.indd 18
08.2.5 4:25:06 PM
08.2.5 4:25:06 PM
