12
KDC-MP632U
KDC-W6534U/UY/X590/X7533U
• With the remote controller, continuous forwarding is pro-
hibited.
• Using the VOL knob, [
] and [
] key, the Fader can be
adjusted in 3 steps : R15
↔
0
↔
F15 (The initial value is 0)
• Using the VOL knob, [
] and [
] key, the Balance can
be adjusted in 3 steps : L15
↔
0
↔
R15 (The initial value is
0)
• Using the VOL knob, [
] and [
] key, the Bass / Middle
/ Treble Level can be adjusted in 3 steps : –8
↔
0
↔
+8
(The initial value is 0)
• Using the VOL knob, [
] and [
] key, the HPF Front /
Rear can be adjusted in 2 steps : Through
↔
180Hz (or
220Hz) (The initial value is Through)
• Using the VOL knob, [
] and [
] key, the LPF Sub Woofer
can be adjusted in 2 steps : 60Hz (or 50Hz)
↔
Through
(The initial value is Through)
• Using the VOL knob, [
] and [
] key, the Sub Woofer
Phase can be adjusted in 2 steps : Reverse
↔
Normal
(The initial value is Normal)
• Using the VOL knob, [
] and [
] key, the Volume Offset
can be adjusted in 2 steps : –8
↔
0 (The initial value is 0)
• Using the VOL knob, [
] and [
] key, the Loudness ON/
OFF can be adjusted in 2 steps : OFF
↔
ON (The initial
value is OFF)
• Using the VOL knob, [
] and [
] key, 2-Zone ON/OFF
can be adjusted in 2 steps : OFF
↔
ON (The initial value is
OFF)
• Bass f / Bass Q / Bass EXT / Middle f / Middle Q / Treble f
do no appear in audio adjustments.
●
MENU
• Press the [Q] key to enter the MENU.
• Press the remote control [DNPP/SBF] key or the [DIRECT]
• Continuous forwarding by remote control is prohibited.
• Initial item in CD/USB source is “F/W Version”.
2-ZONE (Dual Zone) items (Model with 2-ZONE
• When using sources other than the STANDBY source, press
[AUTO] or [TI] key for less than 1 second, 2-ZONE ON/
OFF is achieved.
●
Backup current measurement
When reset in ACC OFF (Back Up ON) condition, MUTE ter-
minal goes off after 2 seconds, instead of 15 seconds. (During
this time, the CD mechanism does not function.)
●
OPEL communication items (Model with OPEL
communication)
During the test mode, OPEL communication line outputs the
following (At every 500msec, the output condition of the com-
munication line will be switched.)
●
Special displays while all lights are on
When all lights are on with STANDBY source, if the follow-
ing keys are pressed, the following messages are displayed.
[1] key
Version is displayed (forwarding)
(Display) TYPE : x_ _ _ (“x” is displayed in hexadecimals)
→
512K – 1.02 (“development ID” – “version”)
→
all lights on
→
∗
TYPE indicates
µ
-com destination, and shows real-time
condition of the destination terminal.
[2] key
Serial No. is displayed (8 digits)
(Display) xxxxxxxx
[3] key
Key pressed: Power ON time is displayed.
While Power ON time is displayed, press and hold for 2
seconds or longer to clear the Power ON time.
(Display)
PON_0Hxx (00~50 is displayed for “xx”. When less
than 1 hour, display by increment of 10
minutes.)
xxxxx (00001~10922 is displayed for “xxxxx”)
MAX 10922 (hours)
[4] key
Key pressed: CD operation time is displayed.
Press the key for more than 2 seconds while the CD
operation time is displayed to clear CD operation time.
(Display)
CDT_0Hxx (00~50 is displayed for “xx”. When less
than 1 hour, display by increment of 10
minutes.)
xxxxx (00001~10922 is displayed for “xxxxx”)
MAX 10922 (hours)
TEST MODE
CE
DATA
CLK
500msec
500msec
500msec
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
