KDC-MP632U
KDC-W6534U/UY/X590/X7533U
11
●
How to enter the test mode
Press and hold the [1] and [3] keys and reset.
(While “– – – –” is being displayed, power can be ON for 30
minutes.)
●
How to clear the test mode
Reset, momentary power down, Acc OFF, Power OFF, detach
the panel.
●
Initial conditions of the test mode
• Source is STANDBY.
• Displays lights are all turned on.
• The volume is at –10dB (The display is 30).
• Loudness (LOUD) is OFF.
• CRSC is OFF, regardless of whether there are switching
functions or not.
• SYSTEM Q is NATURAL (=FLAT).
• BEEP will sound anytime with a less than 1 second push.
• Auxiliary (AUX) is ON.
• SWPRE is SUB WOOFER.
●
RDS automatic measurement
Conventionally, the PS display has been visually checked on
the production line. This will be replaced by a new processing.
The PS data will be received and the PS contents is to be
verified as “RDS_TEST”. When this is verified, the P-CON
terminal is forced to go OFF. (In this case, “ _ ” means blank.)
→
This will be a dedicated test mode processing.
On the P-CON, when power is turned off once and, then,
turned on again, (Power OFF
→
ON) the unit will be re-
started.
Special display when set to TUNER
When in TUNER mode, if any of the following displays appear,
there is an abnormality with the front-end.
• “TNE2P_NG” : The E2PROM of front-end is still with the
• “TNCON_NG” : The communication with the front-end is
●
Forced switching of K3I
In TUNER FM mode, each time [6] key is pressed, the func-
tions move in the following cycle :
AUTO
→
forced WIDE
→
forced MIDDLE
→
force NARROW
→
AUTO
The initial condition is AUTO and the displays below will ap-
pear.
• AUTO : FM1_98.1A
• Forced MIDDLE : FM1_98.1M
• Forced WIDE : FM1_98.1W
• Forced NARROW : FM1_98.1N
●
CD receiver test mode specifications
• Display mode default setting shall be P-TIME.
• Jumps are made to the following tracks by pressing the
[
] key.
No. 9
→
No. 15
→
No. 10
→
No. 11
→
No. 12
→
No. 13
→
No. 22
→
No. 14
→
No. 9 (Returns to the beginning)
It must be noted, however, that when paying MP3 / WMA /
AAC disc, which contain 8 files or less, the first track and
the following tracks are played in order.
• Pressing the [
] key goes back by 1 track from the track
being played.
• When playing an MP3 / WMA / AAC disc, display the file
format before starting to play each file. (“MP3”, “WMA”,
“AAC”)
• When in CD source, by pressing [1] key for less than 1
second, a jump to the Track No. 28 is made.
• When in CD source, by pressing [2] key for less than 1
second, a jump to the Track No. 14 is made.
• While in CD source, press the [3] key to display the CD
mechanism model name and the version. Press the [3] key
again to go back to the normal screen. (Time code display)
• When CD is the source, press the [6] key to jump to No. 15.
At this time, the volume value is set to 25 (2V PRE) or 27
(4V PRE).
●
USB source test mode specification
• While in USB source, press the [6] key to set volume value
to 15.
●
Audio adjust mode
Model with no DSP
• By pressing [AUD] key for less than 1 second, the audio
adjustment mode can be entered.
• Using the remote controller [
∗
] key and [AUD] key, the au-
dio adjustment mode can be entered.
• Adjustment items of both the AUDIO FUNCTION MODE
and SETUP MODE are included.
• The initial item will be Fader, which is followed by : Balance
→
Bass Level
→
Middle Level
→
Treble Level
→
HPF Front
→
HPF Rear
→
LPF Sub Woofer (After this, it will be arbi-
trary)
TEST MODE
6 6 8 0 : 0 1 2 3
Model name
Version
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
