13
KDC-MP332/MP5033
KDC-W534/W534Y
2. Input “KCAR”, using the remote controller.
Press [5] key of the remote controller twice (Input for “K”)
and press [
] key.
Press [2] key of the remote controller 3 times (Input for “C”)
and press [
] key.
Press [2] key of the remote controller once (Input for “A”)
and press [
] key.
Press [7] key of the remote controller twice (Input for “R”)
and press [
] key.
3. The security is cleared and the unit enters STANDBY
source.
4. If wrong codes are input, “– – – –” will be displayed again.
∗
Operation 2
1. After code has been registered, in STANDBY source, press
and hold the [Q] key for 1 second or longer to go into the
MENU. While “CODE_CLR” is displayed, press the [
] keys
for 1 second or longer to cancel the security code.
2. Input pre-registered code, using [FM] / [AM] / [
] / [
]
keys.
[FM] key: numbers go up / [AM] key: numbers go down [
]
key: cursor moved to the right / [
] key: cursor moved to
the left
3. Press the [
] key for 3 seconds or longer and “CLEAR” is
displayed.
4. When the input code is not registered, “ERROR” is dis-
played. Go back to the step 2 and input the code again.
●
Clearing CD mechanism information and service
information (Clearing E2PROM data)
1. While pressing the [Q] key and [ATT] key, reset-start to start
CD mechanism and service information initialization.
(While “– – – –“ is being displayed, power can be ON for 30
minutes.)
[CD mechanism information]
• Displays I2C communication condition
• Displays CD mechanism error log
• Displays CD loading error data.
• Displays CD ejection error data
• Displays CD time code error count data (missing count)
• Displays CD time code error count data (count not updated)
[Service information]
• Displays power ON time is displayed
• Displays CD operation time
• Displays number of CD EJECT times
• Displays number of times panel was opened/closed
• Displays forced Power OFF data
TEST MODE
2. After the initialization process is completed, the following is
displayed.
When successfully completed
: “CD_O_ _ _”
When finished but unsuccessful : “CD_X_ _ _”
3. This mode is cancelled by resetting. (The last screen will
not be retained.)
●
Clearing DC offset error detection data
(E2PROM data clearing)
If DC voltage difference (DC offset error) is detected be-
tween audio power amplifier (power IC)
±
outputs,
“DC_ERR_” is displayed on the display. When this occurs,
the audio is forced-mute and the display displays only
“DC_ERR_”.
Once this product detected a DC offset error, even if it is
restarted (or reset), its display displays “DC_ERR_”.
However, if the error is detected while in Test Mode, it is not
saved in E2PROM.
1. Press and hold [3] and [6] keys and reset-start to go into
the DC offset error display mode.
(While “– – – –“ is being displayed, power can be ON for 30
minutes.)
2. While in STANDBY source, the current DC offset error con-
dition is displayed.
When detected
: “DC_ERR_ _”
When not detected : “DC_OK_ _ _”
3. While error condition is being displayed, press [AUTO] or
[TI] key to clear the detection data. (Clear E2PROM)
4. DC offset error display mode is cancelled by resetting. (The
last screen will not be retained.)
●
FM/AM channel space switching
(KDC-MP332/MP5033 only)
While power is OFF, press and hold [1] and [5] keys, and
press [SRC] key to power ON.
●
Frequency forced display mode ON
(KDC-W534/Y only)
While in STANDBY source, press [1] and [6] keys for 1 sec-
ond or longer.
Содержание KDC-MP5033
Страница 30: ...30 KDC MP332 MP5033 KDC W534 W534Y 3 2 1 B A ...
