12
KDC-MP332/MP5033
KDC-W534/W534Y
[
]
Key pressed: Forced Power OFF data displayed.
key
While the forced power OFF data is displayed, press and
hold for 2 seconds or longer to clear the data.
(Display) POFF_ – – – (No Forced Power OFF)
SEC (Forced Power OFF because of
missing Security Code)
PNL (Forced Power OFF because of
system
µ
-com and panel communication error)
[
]
Key pressed: CD information display mode ON/OFF
key
While in CD information display mode, press and hold for
2 seconds or longer to clear all CD information.
∗
Please refer to the following “CD information display
mode”.
CD information display mode
I2C communication condition display
(Display) I2C_OK_ _
NG
[AM]
CD mechanism error log display
key
(switched by [
] / [
] keys)
↑
(Display) MCERR1: x x
↔
MCERR2: x x
↔
MCERR3: x x
↔
MCERR1: x x
↔
(“– –” or the error code is displayed for “xx”)
CD loading error log display (switched by [
] / [
] keys)
(Display) LDERR1: x x
↔
LDERR2: x x
↔
LDERR1: x x
↔
(Number of times is displayed for “xx”)
MAX 99 (times)
CD ejection error log display (switched by [
] / [
] keys)
(Display) EJERR1: x x
↔
EJERR2: x x
↔
EJERR3: x x
↔
EJERR4: x x
↔
EJERR1: x x
↔
(Number of times is displayed for “xx”)
MAX 99 (times)
CD time code error count data display (missing counts)
(switched by [
] / [
] keys)
(Display) CNT_LOSE
↔
CDDA_ _: xx
↔
CDROM_: xx
↔
CNT_LOSE
↔
(Number of times is displayed for “xx”)
MAX 99 (times)
↓
CD time code error count data display (count not updated)
[FM]
(switched by [
] / [
] keys)
key
(Display) CNT_STAY
↔
CDDA_ _: xx
↔
CDROM_: xx
↔
CNT_STAY
↔
(Number of times is displayed for “xx”)
MAX 99 (times)
●
Security
1) How to enter the forced POWER ON mode
While “– – – –” is being displayed, while simultaneously
pressing [Q] key and [4] key, press [RESET] button, With
this, it is possible to turn the power on for 30 minutes only.
2) How to register the security code on the “Car
Audio Passport” sheet after replacing E2PROM
(IC11) (For models of destination “E” or “M”)
1. Enter the test mode. (Refer to “How to enter the test mode”.)
2. In the test mode, press [Q] key to enter the MENU mode.
When “CODE_SET” is displayed, press [
] key for 1 sec-
ond or longer to enter the security registration mode.
3. Input the security code, using [FM] / [AM] / [
] / [
] keys.
[FM] key: number up / [AM] key: number down
[
] key: cursor to right / [
] key: cursor to left
4. After inputting the code, press [
] key for 3 seconds or
longer which causes “RE-ENTER” to be displayed. This is
for “confirming” the code. Use the method in the step 3 to
re-enter the code.
5. Then, press [
] key for 3 seconds or longer, which will
display “APPROVED”. This completes the security code reg-
istration.
6. Release the test mode. (Refer to “How to clear the test
mode”.)
∗
All clear cannot be used to clear the security code.
3) How to clear the programmable security code
(For KDC-MP332)
∗
Operation 1
1. While “– – – –” is being displayed, press [
] key for 3
seconds or longer while pressing the [AUTO] key. This
makes the “– – – –” display disappear.
TEST MODE
Содержание KDC-MP5033
Страница 30: ...30 KDC MP332 MP5033 KDC W534 W534Y 3 2 1 B A ...
