14
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom
Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
•
Sound cannot be heard.
•
The unit does not turn on.
•
Information shown on
the display is incorrect.
Clean the connectors. (
15
)
The unit does not work
at all.
Reset the unit. (
3
)
Digital Radio
DAB reception is poor.
Make sure [
ON
] is selected for [
DAB ANT POWER
].
(
4
)
“DAB ANT ERR”
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [
DAB ANT POWER
] to [
OFF
].
(
4
)
“RELATED SERV FOUND”
•
Press the volume knob to activate Soft-Link. (
7
)
•
Press
to cancel.
Analog
Radio
•
Radio reception is poor.
•
Static noise while
listening to the radio.
Connect the antenna firmly.
CD / USB /
iPod
Disc cannot be ejected.
Press and hold
M
to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit. (
3
)
Noise is generated.
Skip to another track or change the disc.
Symptom
Remedy
CD / USB / iPod
Tracks do not play back as
you intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the tracks are recorded.
Correct characters are not
displayed (e.g. album
name).
•
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
•
Depending on the display language you have selected
(
5
), some characters may not be displayed
correctly.
“NA FILE”
Make sure the disc contains supported audio files.
(
15, 16
)
“NO DISC”
Insert a playable disc into the loading slot.
“TOC ERROR”
Make sure the disc is clean and inserted properly.
“PLEASE EJECT”
Reset the unit. If this does not solve the problem,
consult your nearest service center.
“READ ERROR”
Copy the files and folders onto the USB device again. If
this does not solve the problem, reset the USB device or
use another USB device.
“NO DEVICE”
Connect a USB device, and change the source to USB
again.
“COPY PRO”
A copy-protected file is played.
“NA DEVICE”
Connect a supported USB device, and check the
connections.
“NO MUSIC”
Connect a USB device that contains playable audio files.
“iPod ERROR”
•
Reconnect the iPod.
•
Reset the iPod.
JS_KWD_KDC_DAB400U_EN_EN_1.indd 14
JS_KWD_KDC_DAB400U_EN_EN_1.indd 14
7/10/2015 2:20:10 PM
7/10/2015 2:20:10 PM
