background image

22

   

|

   

KDC-BT7539U

Bluetooth Setup

Registering Bluetooth device

To make your Bluetooth device (cell-phone or audio 
player) usable with this unit, you need to register 
it (pairing). You can register up to five Bluetooth 
devices to this unit.

When registering from Bluetooth devices

1

  Turn on the control unit.

2

  Start registering a unit by operating the 

Bluetooth device

By operating the Bluetooth device, register 
the hands-free unit or audio player (pairing). 
Select “KENWOOD BT CD/R-2P2” from the list of 
connected units. 

3

  Enter a PIN code

Input the PIN code registered as mentioned in 
<Registering PIN Code> (page 23).

Check that registration is complete on the 
Bluetooth device.

4

  By operating the Bluetooth device, start hands-

free or audio connection.

When registering from this unit

1

  Select Bluetooth device registration item 

during Menu mode  (In Standby mode)

“Device Regist” is displayed.
For how to select Function Control items, refer to 
<Function Control> (page 6).

2

  Enter Bluetooth device registration mode

Press the Control knob for at least 1 second.

Search for the Bluetooth device.
When search is completed, “Finished” is displayed.

3

  Select the Bluetooth device

Turn the Control knob or push it towards up or 
down to select the Bluetooth device.
Press the Control knob to determine the 
selection.

4

  Input the PIN code

Operation type

Operation

Select the numbers.

Turn the Control knob or push it towards 
up or down.

Move to the next digit.

Push the Control knob towards right.

Delete the last digit.

Push the Control knob towards left.

5

  Transmit the PIN code

Press the Control knob for at least 1 second.

If “Pairing Success” is displayed, registration is 
completed.

6

  Return to the device list

Press the Control knob.

7

  Exit Bluetooth device registration

Press the [FNC] button.

•  This unit allows up to eight digits to be input for a PIN 

code. If a PIN code cannot be input from this unit, it can 
be input from the Bluetooth device.

•  If there are 5 or more Bluetooth devices registered, you 

cannot register a new Bluetooth device.

•  If the error message appears even though the PIN code 

is correct, try <Registering Special Bluetooth device> 
(page 22).

Registering Special Bluetooth device

Allow registration of a special device that cannot be 
registered normally (pairing).

1

  Select special device registration item during 

Menu mode  (In Standby mode)

“SPCL DVC Select” is displayed.
For how to select Function Control items, refer to 
<Function Control> (page 6).

2

  Enter special device registration mode

Press the Control knob for at least 1 second.

A list is displayed.

3

  Select a device name

Turn the Control knob or push it towards up or 
down to select a device name.
Press the Control knob to determine the 
selection.

If “Completed” is displayed, registration is 
completed.

4

  Go through the procedure of <Registering 

Bluetooth device> (page 22) and complete the 
registration (pairing).

Cancelling special device registration mode

Press the [FNC] button.

•  If the device name is not in the list, select “Other Phone”.

B64-4164-00̲00̲M̲English.indd   22

B64-4164-00̲00̲M̲English.indd   22

08.4.8   9:05:55 AM

08.4.8   9:05:55 AM

Содержание KDC-BT7539U









































Отзывы: