
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting “2 ZONE” of <Audio Setup> (page
19) to “ON”.
: Can be set while a cell-phone is connected.
: Refer to the reference page.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
1
Enter Function Control mode
Press the [SEARCH] button for at least 1 second.
”FUNCTION” is displayed.
2
Select your desired setup item
Operation type
Operation
Movement between items
Turn the [AUD] knob.
Selection of item
Press the [AUD] knob.
Return to previous item
Press the [SEARCH] button.
Repeat selection and determination until your
desired setup item is selected.
Example:
DOT LINE
MENU
In this manual, the above selection is
indicated as
Select “MENU”
>
“DOT LINE”.
3
Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with
mark can be set by
press the [AUD] knob.
• The value of items with
mark can be set by
pushing the [AUD] knob towards right or left.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the [AUD] knob
is displayed in the Entry column in seconds.
• For the functions accompanied by the
description of the setting procedure and so forth,
the reference page numbers are displayed.
4
Exit Function Control mode
Press the [SEARCH] button for at least 1 second.
Function Control
8
|
KDC-BT7043U/ KDC-MP6043U
B64-4316-00_00.indb 8
08.11.1 0:53:09 PM