Kenwood KDC-BT565U, Инструкция по эксплуатации

Страница: 21 / 104

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current call
Press . Press .
Reject another incoming call
Press .
Press .
While having two active calls...
End current call and activate
held call
Press .
Press .
Swap between the current
call and held call
Press . Press .
Adjust the phone volume
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
( Not available )
Switch between hands-free
and private talk modes
Press during a call.
• Operations may vary
according to the connected
Bluetooth device.
( Not available )
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [ FUNCTION ].
2
Turn the volume knob to select an item (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press .
Default: XX
MIC GAIN –10 — +10 ( –4 ): The sensitivity of the
microphone increases as the number increased.
NR LEVEL –5 — +5 ( 0 ): Adjust the noise reduction level
until the least noise is being heard during a
phone conversation.
ECHO CANCEL –5 — +5 ( 0 ): Adjust the echo cancellation
delay time until the least echo is being heard
during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected
or activated.
4
Press and hold to exit.
To return to the previous setting item, press .
Default: XX
SETTINGS
AUTO ANSWER 1 — 30 : The unit answers incoming call
automatically in the selected time (in
seconds). ;
OFF : Cancels.
BATT/SIGNAL * AUTO : Shows the strength of the battery
and signal when the unit detects a Bluetooth
device and the Bluetooth device is connected. ;
OFF : Cancels. Clock time is shown.
*
Functionality depends on the type of the phone used.
JS_KWD_KDC_X500_KW_EN_00_9.indd 17 JS_KWD_KDC_X500_KW_EN_00_9.indd 17 18/9/2015 4:14:18 PM 18/9/2015 4:14:18 PM