Kenwood KDC-7027, Инструкция по эксплуатации

Страница: 11 / 48

English
|
11
Selecting the Source
Press the [SRC] button.
Source required
Display
Tuner "TUNER"
CD "CD"
External disc (Optional accessory) "CD CH"/"CD2"
Auxiliary input "AUX"
Standby (Illumination only mode) "STANDBY"
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicles battery.
The time until full power OFF can be set in 'Power OFF
Timer' (page 36).
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator
turns ON or OFF.
When it’s ON, the "ATT" indicator blinks.
System Q
You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type Button Display
OFF [2] "OFF"
For 5 & 4 in. speaker [3] "5/4"
For 6 & 6x9 in. speaker [4] "69/6"
For the OEM speaker [5] "OEM"
4
Exit Speaker Setting mode
Press the [Q] button.
Sound setting Display
Flat "Flat"
User memory "User"
Rock "Rock"
Pops "Pops"
Easy "Easy"
Top 40 "Top40"
Jazz "Jazz"
• User memory: The values set on the 'Audio Control'
(page 12).
• Each setting value is changed with the 'Speaker
Setting' (page 11).
First, select the speaker type with the Speaker setting.
B64-2750-00̲U.S(E).Indd 11 03.11.27, 3:37:37 PM