8
English
Listening to the Radio
1
Press
SRC
to select “TUNER”.
2
Press
BAND
repeatedly to select a band
(FM1/ FM2/ FM3/ AM).
3
Press
4
/
¢
to search for a station.
Using the remote controller (RC-405)
#FM+ / *AM–
:
Selects band.
4
/ +
¢
:
Selects station.
1 – 6
:
Selects preset station.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter
[FUNCTION]
mode.
2
Turn the volume knob to select
[SETTINGS]
, then press to enter.
3
Turn the volume knob to make a
selection, then press to confirm.
See table below for selection.
4
Hold
to finish the procedure.
■
Hold for about 2 seconds to memorize the current station or the selected Program
Type. (Refer to
[PTY SEARCH]
on the table below to select the Program Type.)
■
Press briefly to recall memorized station (or Program Type after entering the PTY
search mode).
Item
Selectable setting (Preset: *)
SEEK MODE
Selects the tuning mode for
4
/
¢
buttons.
AUTO1 *:
Automatically search for a station. ;
AUTO2:
Search in the order of the stations in the preset memory. ;
MANUAL:
Manually search for a station.
AUTO MEMORY YES:
Automatically starts memorizing 6 stations with good reception. ;
NO *:
Cancels (automatic memorizing is
not activated). (Selectable only if
[NORMAL]
is selected for
[PRESET TYPE]
.) (page 5)
TI
ON:
The traffic information automatically when the traffic bulletin starts. ;
OFF *:
Cancels. (Not applicable if “AM”
is selected)
Muting upon the reception of a phone call (KDC-X395/ KDC-348U only)
To use this feature, connect the MUTE lead to your telephone using a commercial telephone
accessory. (See “Installation Manual” on a separate volume.)
When a call comes in, “CALL” appears.
■
The audio system pauses.
■
To continue listen to the audio system during a call, press
SRC
. “CALL” disappear and the
audio system resumes.
When a call ends, “CALL” disappear.
■
The audio system resumes.
B64-4798-10̲01̲K.indb 8
B64-4798-10̲01̲K.indb 8
11/01/06 15:06
11/01/06 15:06
