7
ENGLISH
Hold for about 2 seconds to memorize the current station.
Press briefly to recall memorized station.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter
[FUNCTION]
mode.
2
Turn the volume knob to select
[SETTINGS]
, then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4
Hold
to finish the procedure.
Item
Selectable setting (Preset: *)
SEEK MODE
Selects the tuning mode for
4
/
¢
buttons.
AUTO1 *:
Automatically search for a station. ;
AUTO2:
Search in the order of the stations in the preset
memory. ;
MANUAL:
Manually search for a station.
AUTO MEMORY YES:
Automatically starts memorizing 6 stations with good reception. ;
NO *:
Cancels (automatic
memorizing is not activated). (Selectable only if
[NORM]
is selected for
[PRESET TYPE]
.) (page 6)
MONO SET
ON:
Improve the FM reception (but the stereo effect may be lost). ;
OFF *:
Cancels (stereo effect resumes).
Using the remote controller (RC-405)
FM+ / AM–
:
Selects band.
4
/
¢
( + ) :
Selects station.
1 – 6
:
Selects preset station.
Listening to the radio
Item
Selectable setting (Preset: *)
SWITCH PRE REAR */ SUB-W:
Selects whether rear speakers or a subwoofer are connected to the line out terminals on the
rear of the unit (through an external amplifier).
SP SELECT
OFF */ 5/4/ 6 × 9/6/ OEM:
Selects the speaker size for optimum performance.
F/W UP xx.xx YES:
Starts upgrading the firmware. ;
NO *:
Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
1
Press
SRC
to select “TUNER.”
2
Press
BAND
repeatedly to select a band (FM1/ FM2/ FM3/ AM).
3
Press
4
/
¢
to search for a station.
EN02-15_KDC-248U[K]5.indd 7
EN02-15_KDC-248U[K]5.indd 7
8/24/10 5:11:23 PM
8/24/10 5:11:23 PM
