Kenwood KDBU 170, Инструкция по использованию - Рекомендации по установке

Страница: 22 / 40

22
INSIDE OF OVEN
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water.
Suitable proprietary chemical cleaners may be used after first consulting with the manufac -
turers recommendations and testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surfa-
ce.
NOTE: The manufacturers of this appliance will accept no responsibility for damage cau-
sed by chemical or abrasive cleaning.
Let the oven cool down and pay special attention no to touch the hot heating ele-
ments inside the oven cavity.
REPLACING THE OVEN LIGHT
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down.
• Switch off the electrical supply.
• Unscrew the protective cover “ C ” (figs. 5.3a, 5.3b).
• Unscrew and replace the bulb “
B
” with a new one suitable for high temperatures
(300°C) having the following specifications: 230V, E14 and same power (check watt
power as stamped in the bulb itself) of the replaced bulb.
• Refit the protective cover “ C ”.
NOTE: Oven bulb replacement is not covered by your guarantee.
B C
B C
TOP OVEN BOTTOM MAIN OVEN
Fig. 5.3a Fig. 5.3b