Kenwood KAC-8102D, Инструкция по эксплуатации

Страница: 6 / 20

6 English
Dual Mono Drive (Function of the KAC-9152D)
,
,).%/54
2%-/4%
f
f
g
g
,).%/54
,
2%-/4%
Subwoofer
(2 Ω or higher)
CENTER UNIT
Remote controller
A Dual Mono Drive system is a system in which 2 monaural amplifiers are
both set to bridged mode to drive one subwoofer with a high-output signal.
Setting
1. If you use the connection as shown, set amplifier
¡
to the Forward phase
(PHASE: 0 º) and set amplifier
™
to the Reverse phase (PHASE: 180 º).
2. Set all other switches (except for the "PHASE" switch) of amplifiers
¡
and
™
to
the same position.
Connection
1. Connect the
9
speaker wire to the
9
terminal of amplifier
¡
. Also, connect
the
·
speaker wire to the
9
terminal of amplifier
™
.
2. Connect between
·
terminals of amplifiers
¡
and
™
.
3. The remote controller can be used just when connected to amplifier
¡
. It can
be used for more fine control if also connected to amplifier
™
.
2
CAUTION
• Always connect between
·
terminals of amplifiers
¡
and
™
. If a cable is
incorrectly connected between
9
and
·
terminals of these amplifiers, the
amplifier protection circuit is turned on.
• Use a speaker having the 2Ω or higher impedance only.
• To protect the electrical system from a short-circuiting, be sure to remove the
·
battery cable from the vehicle in advance.
• Fully insulate amplifier terminals and speaker terminals to avoid a high voltage
from peripherals.
3.KAC-9152D̲KE.indb 6 3.KAC-9152D̲KE.indb 6 04.12.7 9:56:23 AM 04.12.7 9:56:23 AM