21
half-load detection system
Your machine features a half-load detection system. In case you load machine to approximately half
or less than the maximum laundry capacity, your machine will run so as to save washing time, water
consumption and energy in some programmes. When half load function is active, the machine can
complete the programme you have set in a shorter time.
optional functions
Depending on the programme you select, you can combine different optional functions.
• Press the button of the optional function you would like to select.
• If the indication of the function button remains lit it means that the function has been selected.
• If the indication of the function button is flashing it means you cannot use that additional function
for the wash programme you selected.
Reason for non-activation:
• The optional function you want to use in the washing programme you have selected is not
applicable.
• Your machine has passed the stage, during which the optional function you want to select would
be implemented.
• It is not compatible with an optional function you have selected previously.
washing water temperature selection
You can select the washing water temperature with the Temp
button.
You can gradually decrease the washing water temperature
between the maximum temperature of the selected programme
and cold washing by repeatedly pressing the
Temp
button.
If you have missed the washing water temperature you want,
continue and the temperature selection will loop back around.
Temperature Cycle
90° - 80° - 70° - 60°- 50° - 40° - 30° -
and
-- (cold)
spin speed
You can adjust the spin speed by pressing the
Spin
button. Only
a lower spin speed than the one of the selected program can be
selected.
Spin speeds selectable are:
1400 - 1200 - 1000 - 800 - 600 - 400 - or -- (no spin)
manual soaking
To manually soak your laundry, press the
Start / Pause
button a few minutes after the wash
programme has started when the drum is full of water. The washing machine will suspend the
laundry to soak it in the water. After your desired soaking time, press the
Start / Pause
button, the
machine will continue the previous wash.
Temp.
Spin
Delay
Start /Pause
Selections
60°C
40°C
Pre Wash
Temp.
Spin
Delay
Start /Pause
Selections
60°C
40°C
Pre Wash
Kenwood 10kg Washing Machine K1014WM18 Manual.indd 21
21/06/2018 08:17
