Kenwood HM-V655MP Скачать руководство пользователя страница 54

Страница: 54 / 56

In case of difficulty

Connect antennas.

Select a band.

Tune to the frequency of the desired station.

Install the outdoor antenna in an apart position from the road.

Switch the suspected electric appliance OFF.

Install the TV or the system at an increased distance between
them.

Preset stations with tunable frequencies.

Preset stations again.

Radio stations cannot be received.

Noise interferes.

A station has been preset but it cannot be re-
ceived by pressing the P.CALL key.

Remedy

Symptom

Tuner section

Place the disc properly, with the label side facing upward.

Clean the disc referring to "

Disc handling precautions

Refer to "

Caution on condensation

" and remove the condensa-

tion by evaporation.

A non-finalized CD-R or CD-RW cannot be played back.

Press the

key.

Clean the disc referring to "

Disc handling precautions

Clean the disc referring to "

Disc handling precautions

Install the unit in a place not subject to vibrations.

Select the correct video format.

Check the video format of the VIDEO CD or the monitor.

Replace by a VIDEO CD disc.

Press the

key.

Operate the TV correctly. Refer to "

Connection of Other Acces-

sories (Commercially Available Parts)

" and connect the video

cord correctly.

Clean the disc refering to "

Disc handling precautions

Try another disc.

Menu playback is not possible for a disc without PBC.

Press the

AUTO PBC

key on the remote control unit to select

PBC ON

Remedy

CD player section

A CD is placed in the player but it cannot be
played.

Sound is not produced.

Sound skips.

The upper and lower parts of the playback
picture of a VIDEO CD are missing or black-
ened.

Picture is not produced.

Menu playback is not possible.

Symptom

Some CD-R and CD-RW discs may not be playable on this unit even if it has been finalized.

5281/51-56/EN

6/17/02, 4:43 PM

Содержание HM-V655MP

























































Результаты поиска

Содержание HM-V655MP

Отзывы:

Похожие инструкции для HM-V655MP

Бренды по названию

Популярные бренды

Kenwood HM-V655MP, Инструкция по эксплуатации

Результаты поиска

Содержание HM-V655MP

Отзывы:

Похожие инструкции для HM-V655MP

Бренды по названию

Популярные бренды