background image

Receiving broadcast station

21

 EN

1.

Load a cassette tape.

2.

Start playback.

Press the TAPE 

2

 

3

 key.

To stop playback

Selection of TAPE equalizer (TAPE EQ.)

To wind tape at  high speed

Start playback

To wind tape at  high speed

÷

The tape deck of the unit can play Normal (Type  )  tapes.

÷

When there is a tape slack, wind the tape before loading.

W

If you load a tape in the cassette deck in advance while the power is off, pressing the TAPE 

2

 

3

 key will

turns the power on automatically and starts the tape playback.

Displayed when the deck is loaded with a tape.

Reverse mode

indication

Transport direction indicators

Tape

counter

Do not use a cassette with more than 90-minute recording time, for the

tape used with such a cassette is very thin and tends to cause troubles

such as entanglement around the pinch roller or cutting off tape.

Transport direction indicators:

Indicates the tape transport direction during playback or recording by lighting

of 

2

 or 

3

. This direction is the direction stored in memory when the tape was

last stopped.

To stop playback

Start playback

1

Press the area marked 

)

 push open  to open the cassette holder.

2

Insert a tape.

3

Press the area marked 

)

 push open to close the cassette holder.

Playback of TAPE

5281/21-25/EN

6/13/02, 9:32 AM

21

Содержание HM-V655MP

























































Отзывы: