background image

56

Knowledge sections

Important Items

Specifications

[Amplifier section]

Rated output power during STEREO operation

(1 kHz, 10% T.H.D., at 6 

) .................  30 W + 30 W

(For Singapore)
Rated output power during STEREO operation

(1 kHz, 10% T.H.D., at 6 

) .................  25 W + 25 W

Frequency response

AUX ..............................  50 Hz~50 kHz (0 dB ~ -3dB)

[Tuner section]

FM tuner section

Tuning frequency range ......... 87.5 MHz ~ 108 MHz

AM (MW) tuner section

Tuning frequency range

9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz

[CD player section]

Laser

....................................... Semiconductor laser

D/A Conversion ....................................................... 1 Bit
Over sampling ....................................... 8 fs (352.8 kHz)
Laser wave length .................................. 760 to 800 nm
Laser power class ...................................... Class 1 (IEC)
Digital output (Optical) .............. – 15 dBm ~ – 21 dBm

(Wave length 660 nm)

Video Output format .................................... NTSC/PAL
Video Output level ................................... 1 Vp-p (75 

)

[Cassette deck section]

Track

................................ 4-track, 2-channel stereo

Recording system ................................ AC bias system

(Frequency: 105 kHz)

Heads

Playback/ recording head ....................................... 1
Erasing head ............................................................. 1

Motor

......................................................................... 1

Wow and flutter ................................  0.2 % (W.R.M.S.)
Fast winding time ....................... Approx. 110 seconds

(C-60 tape)

Main unit

Enclosure ....  Bass-refrex type, magnetically shielded
Speaker configuration

Woofer ......................................  120 mm, cone type
Tweeter .....................................  25 mm, dome type

Impedance ................................................................  6 

Maximum input level ............................................ 30 W
Dimensions ................................................. W : 150 mm

......................................................................

H : 255 mm

......................................................................

D : 215 mm

Weight (net) ............................................ 2.3 kg (1 piece)

Speakers

[General]

Power consumption .............................................  90 W

(For Singapore)
Power consumption .............................................  80 W
Dimensions ................................................. W : 180 mm

......................................................................

H : 255 mm

......................................................................

D : 317 mm

Weight (net) ..........................................................  5.5 kg

KENWOOD follows a policy of continuous ad-
vancements in development. For this reason speci-
fications may be changed without notice.

÷

Sufficient performance may not be exhibited at

extremely cold locations (where water freezes).

For your records

Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model

Serial Number

Notes

Notes

Notes

Содержание HM-353V

























































Отзывы: