59
DVR-8100 (EN)
Knowledge
Remote control unit
Symptom
Cause
Remedy
Remote control operation is not pos-
sible.
÷
Batteries are exhausted.
÷
The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.
÷
There is no disc set in the component to be
played.
÷
Operation has been performed with the
keys of the main unit.
÷
A nonfunctional key has been pressed
÷
Replace with new batteries.
÷
Operate the unit inside the remote control-
lable range.
÷
Set a disc in the component to be played.
÷
Perform operation after once pressing
the key for the input or device to be
operated.
^
^
¶
&
÷
Load a disc and press the play (
6
) key.
÷
Turn the disc over and properly place it on
the disc tray.
÷
Turn on the TV.
÷
Properly reconnect the connection cords.
÷
This is not a malfunction.
÷
Set the sound volume to an appropriate
level.
÷
Press the play (
6
) key to resume normal
playback mode.
÷
Separate this unit as far as possible from
the device you think is generating the noise.
÷
Refer to the “Disc handling precautions”
section and wipe dirt from the disc.
÷
Use a new disc.
÷
Refer to the “Caution on condensation”
section and evaporate the condensation.
÷
Approximately 10 to 20 seconds are re-
quired for a disc to start playing, although
the time differs depending on the disc.
÷
Refer to the “Video formats” section ,and
use a disc with the appropriate video for-
mat for your TV or a TV with the appropriate
video format for the disc.
÷
Menu playback is available only with VCD
discs recorded with P.B.C.
÷
The subtitle cannot be displayed when the
DVD disc being played does not contain the
recording of subtitles.
÷
Press the
S.TITLE
key to switch on the
subtitle mode.
÷
The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more
than one voice (or subtitle) language.
÷
There is no disc in the player.
÷
There are no signals recorded on the side of
the disc being played.
÷
The TV is not turned on.
÷
The connection cords are not properly con-
nected.
÷
The picture is slightly disrupted during fast
forward and fast reverse operations.
÷
The volume control of this set is not ad-
justed properly.
÷
The player is in a special playback mode.
÷
A nearby device is generating noise.
÷
The disc is dirty.
÷
The disc is damaged.
÷
There is condensation on the optical lens.
÷
Time is required for the unit to detect the
disc type and size and for the rotation of the
motor to stabilize. This is not a malfunction.
÷
The video format of the disc being played
does not match that of the connected TV
monitor.
÷
The VCD disc being played is not compat-
ible with P.B.C.
÷
The DVD disc being played does not con-
tain the recording of subtitles.
÷
The subtitle mode is set to off.
÷
The DVD disc being played does not con-
tain the recording of more than one audio
(or subtitle) language.
DVD / CD player unit
Playback does not start when the play
(
6
) key is pressed.
Playback starts but no image/sound
is seen/heard.
The picture is disrupted when the im-
age is fast forwarded or fast reversed.
No sound is heard.
The picture does not look good or the
picture/sound quality is poor.
It takes a while for the disc to start
playing.
The top and bottom of the screen can-
not be seen.
A VCD cannot be played using menus.
The subtitle is not displayed.
The voice (or subtitle) language can-
not be changed.
Remedy
Cause
Symptom
¶
¶
#
&
¶
7
6
0
°
⁄
In case of difficulty
*5290/57-64/EN
02.6.25, 7:53 PM
59