Kenwood DPX502U, Инструкция по эксплуатации

Страница: 14 / 44

14
|
English
Tuner features
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Station Preset Memory
Putting a station in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob towards [
4
] or [
¢
].
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least 2
seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory
on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
"A-MEMORY" is displayed.
When 6 stations that can be received are put in the
memory Auto Memory Entry closes.
⁄
• When the <AF (Alternative Frequency)> (page 28) is ON,
only RDS stations are put in the memory.
• When Auto Memory Entry is done in the FM2 band, the
RDS stations preset in the FM1 band are not put in the
memory.
Likewise, when Auto Memory Entry is done in the FM3
band, RDS stations preset in FM1 or FM2 are not put in
the memory.
Preset Tuning
Recalling the stations in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Recall the station
Press the desired [1] — [6] button.
B64-3829-00̲00.Indd 14 B64-3829-00̲00.Indd 14 07.5.8 9:21:52 AM 07.5.8 9:21:52 AM