Kenwood DPX303MBT, Инструкция по эксплуатации

Страница: 42 / 144

38
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
(For / / )
How to remove the unit
1 Fit the catch pin on the extraction keys into the holes on
both sides of the trim plate, then pull it out.
2
Insert the extraction keys deeply into the slots on each
side, then follow the arrows as shown on the illustration.
Do the required wiring.
( 39)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with screws (supplied).
* For / / :
Remove the mounting sleeve and trim plate from the unit
before installing.
Use only the specified screws. Using wrong screws might
damage the unit.
INSTALLATION/CONNECTION
(For / / )
Installing in Toyota cars
Install onto the car brackets using screws (F) or (G) (supplied). Use the mounting holes ( ) or ( ) that fit the
car brackets. Then, install the supplied trim plate (C) .
Do the required wiring.
( 39)
Dashboard of your car
Car bracket
JS_KWD_DPX_793BH_KN_EN_3.indd 38 JS_KWD_DPX_793BH_KN_EN_3.indd 38 7/25/2017 10:40:08 AM 7/25/2017 10:40:08 AM