Kenwood DPX303MBT, Инструкция по эксплуатации

Страница: 29 / 144

ENGLISH
25
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Make a call from memory
1 Press to enter Bluetooth mode.
2
Press one of the number buttons ( 1 to 6 ).
3
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
Other settings
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONE SELECT Selects the phone or audio device to connect or disconnect.
“
* ” appears in front of the device name when connected.
“ ” appears in front of the current playback audio device.
• You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
AUDIO SELECT
DEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
PIN CODE EDIT
(0000) Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2 Press
S
/
T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the PIN code.
3 Press the volume knob to confirm.
RECONNECT ON : The unit automatically reconnect when the last connected
Bluetooth device is within range. ; OFF : Cancels.
AUTO PAIRING ON : The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device,
this function may not work. ;
OFF : Cancels.
INITIALIZE YES : Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO : Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2
Search and select this unit model name (DPX7 ** /DPX59 * /DPX54 * /
DPX52 * /DPX50 * /DPX3 *** ) on the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold to turn off the unit.
JS_KWD_DPX_793BH_KN_EN_3.indd 25 JS_KWD_DPX_793BH_KN_EN_3.indd 25 7/25/2017 10:40:04 AM 7/25/2017 10:40:04 AM