Kenwood DPX-U5130, Инструкция по эксплуатации

Страница: 37 / 48

English |
37
Deleting the phone book
You can delete the phone book stored in this unit to
which a cell-phone − which is not compatible with
PBAP − is connected.
1
Press the [
7
] button.
2
Search for a number/name in the phone book.
Operation type Operation
Selection of name list and number list Turn the [Control knob].
Switching to number list Press the [Control knob].
Switching to name list Press the [
6
].
3
Press and hold the [Control knob].
4
Use the [Control knob] to select the item to be
deleted.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
Display Item to be deleted
“DELETE ONE” When a name is selected, all phone numbers
registered to the name are deleted.
When a phone number is selected, only the selected
phone number is deleted.
“DELETE ALL” When a name is selected, all the registered phone
books are deleted.
When a phone number is selected, all the phone
books having the name to which the selected
number are deleted.
5
Use the [Control knob] to select “YES”.
“COMPLETED” appears.
Displaying the firmware version
You can view the version of the firmware of this
unit.
1
Press the [ Ú ] button.
“BT MODE” appears and enter the Bluetooth mode.
2
Use the [Control knob] to select “SETTINGS” >
“DETAILED SET” > “BT F/W UPDATE”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
The firmware version appears.
Exit the Bluetooth mode.
Press the [
Ú
] button.
How to update
•
For how to update the firmware, access our web site.
www.kenwood.com/cs/ce/bt/
Bluetooth detail setting
You can configure the initial settings of this unit.
1
Press the [
Ú
] button.
“BT MODE” appears and enter the Bluetooth mode.
2
Use the [Control knob] to select “SETTINGS” >
“DETAILED SET”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
3
Use the [Control knob] to select an Bluetooth
detail setting item.
Display Description
“AUTO ANSWER” Automatically answers a call after lapse of the
preset time interval.
“OFF” : Does not answer the phone call
automatically.
“1” – “8” – “99”
:
Automatically answers the phone call after lapse
of 1 – 99 seconds.
“RECONNECT” When set to “ON”, starts re-pairing with the
registered Bluetooth device automatically when
it becomes unpaired.
“ON” / “OFF”
“AUTO PAIRING” When set to “ON”, performs Bluetooth pairing
automatically when the iPhone is connected to
the USB terminal.
“ON” / “OFF”
“BT HF/AUDIO” Specifies the output speakers for hands-free
voice communication and Bluetooth audio
sound.
“FRONT”
: Outputs sound from the front
speakers.
“ALL”
: Outputs sound from the front and rear
speakers.
“CALL BEEP”
Sets whether to output a beep from the speaker
when a call comes in.
“ON”
: Outputs a beep.
“OFF”
: Does not output a beep.
“MIC GAIN” Adjusts the sensitivity of the microphone for
telephone call or adjusts the voice of the caller.
“-20” – ”0” – “+8”
“ECHO CANCEL” Sets the echo cancellation level.
“1” – ”4” – “10”
( : Factory setting)
4
Use the [Control knob] to select a setting.
The previous item appears.
Exit the Bluetooth mode.
Press the [
Ú
] button.
13-2DIN_M_EN_00.indb 37 12/11/26 15:59