Kenwood DPX-U5130, Инструкция по эксплуатации

Страница: 36 / 48

36
|
DPX-U5130BT/ DPX-U5130
Bluetooth settings (Function of DPX-U5130BT)
Registering the PIN code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Press the [
Ú
] button.
“BT MODE” appears and enter the Bluetooth mode.
2
Use the [Control knob] to select “SETTINGS” >
“DETAILED SET” > “PIN CODE EDIT”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
3
Input the PIN code
Operation type Operation
Selection of numbers Turn the [Control knob].
Movement to the next digit Press the [
F
].
Deletion of the last digit Press the [
E
].
Transmission of PIN code Press the [Control knob].
If “COMPLETED” appears and registration is
complete.
Exit the Bluetooth mode.
Press the [
Ú
] button.
Notes on PIN code input
•
By default, “0000” is specified.
•
A PIN code can be specified with up to eight digits.
Downloading the phone book
If the phone book is not downloaded automatically
to this unit to which a cell-phone -which is not
compatible with PBAP- is connected, download it in
the following manner:
1
Press the [
Ú
] button.
“BT MODE” appears and enter the Bluetooth mode.
2
Use the [Control knob] to select “SETTINGS” >
“TRANSFER PB”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
When downloading starts, “PB DL ###” appears.
Exit the Bluetooth mode.
Press the [
Ú
] button.
Maximum number of phone numbers that can be
registered
•
Up to 400 phone numbers can be registered for each
registered cell-phone.
•
Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer characters
can be input depending on the type of characters.)
Cancellation of downloading
•
To cancel downloading of the phone book data, operate
the cell-phone.
13-2DIN_M_EN_00.indb 36 12/11/26 15:59