DPF-K6010V
11
ADJUSTMENT
¶
RF signal and TE signal in test mode (PLAY).
¶
RF signal and TE signal in test mode (Focusing
servo ON / Tracking servo OFF). (Disc Type 4)
¶
Adjust TE signal so that the waveform is sym-
metrical in relation to VC. (TE BALANCE)
¶
RF signal in test mode (PLAY).
¶
Perform the tangential and focusing offset are
focused into one point on the display. The cross-
ing points above and below the center shall also
be looked clearly.
(FE BALANCE)
VC : 2.5 V
VC : 2.5 V
FIG. (b)
CH1
RF signal
VC : 2.5 V
VC : 2.5 V
CH1
RF signal
FIG. (c)
CH2
TE1 signal
RF signal
CH2
TE1 signal
FIG. (d)
DPF-K6010V(K)
COVER1,1(
98.12.10
10:55
y [ W 18