36
ENGLISH
<Clock>
Select the method to set the date and clock. For
details, see “Calendar/clock settings” on page 5.
<Time Zone>
*
Select the time zone for your area. For details, see
“Calendar/clock settings” on page 5.
* Selectable when [Clock] is set to [Manual]. (Page 5)
<Clock Adjust>
*
Adjust the date and clock manually. For details, see
“Calendar/clock settings” on page 5.
* Selectable when [Clock] is set to [Manual]. (Page 5)
Settings
Settings
<Beep>
*
•
ON
(Initial): Activates the key-touch tone.
•
OFF
: Deactivates the key-touch tone.
* Available only when <X’over Network> is set to [2way].
(Page 30)
<Language Select>
Select the text language used for on-screen
information. For details, see “Initial settings” on
page 4.
<Touch Panel Adjust>
Adjust the touch positions of the keys on the screen.
Touch and hold the center of the marks at the lower
left (
1
), then the upper right (
2
) as instructed.
(Hold)
(Hold)
• To reset the touch position, touch
[Reset]
.
• To cancel the current operation, touch
[Cancel]
.
2
Select a function to assign to the selected
button.
3
Repeat steps 1 and 2 to register other
functions to other buttons.
4
Touch [Learning completed] to finish
procedure.
A confirmation message appears. Touch
[Yes]
.
• The unit can register/change all of the buttons’
functions at the same time. To do this, press all
buttons in turn and after pressing all of them, touch
[Learning completed]
in step 2.
• When changing the functions already learned, touch
the assigned function you want to change in step 2
and then touch to select the new function from the
function list.
• Confirm the contents of the settable functions in the
function list. You cannot edit the function list.
To initialize the setting:
Touch
[Learning
initialisation]
in step 2.
• A confirmation message appears. Touch
[Yes]
.
–
To cancel the initialization, touch
[No]
.
00_EN_DMX5019DAB_TC_E.indb 36
00_EN_DMX5019DAB_TC_E.indb 36
28/9/2018 8:44:29 AM
28/9/2018 8:44:29 AM
