Kenwood DM-VH7 Скачать руководство пользователя страница 25

Страница: 25 / 52

DM-VH7 (EN)

When this unit is connected with the CD receiver (RD-VH7) through a system control cord, recording (MD)
and playback (CD) can be started simultaneously so that playback sound can be recorded without the loss
of any part.

Select the REC INPUT.

REC INPUT

Select

“DIN CD”

for recording a digital input or

“ANA-

LOG”

for recording an analog input.

Put the MD recorder in record-pause mode.

Play the CD player.

Preparation

Adjust the recording level.

Play the CD to be recorded.

Press the MONITOR key

To decrease
level

To increase
level

Adjust the recording level.

MONITOR

The recording level can be adjusted even during record-
ing.

Press the

MONITOR

key again to cancel monitoring.

Level value

Adjust so that the segments before the vertical bars near
the right end of the level meter light occasionally.

The initial recording level is -12 dB for analog input
recording and 0 dB for digital input recording.

The recording level can also be adjusted using the

rec

level

keys on the main unit.

Adjust so that these segments light at times.

Stop CD playback.

When the CD playback starts, the MD recording starts
automatically.

Press the record (

) key to enter record-pause mode

automatically.

Systematized recording features

Synchro recording with CD player

Each press switches the mode.

ANALOG
DIN CD
MONO

Connect the digital output of the CD receiver to
DIGITAL 1 input of the MD recorder.

Select the CD input on the CD receiver.

Load a recordable MD in the MD recorder.

LEVEL

0dB

D.IN CD

MONITOR
AUTO
DIN CD
L
R

TRACK

Содержание DM-VH7





















































Результаты поиска

Содержание DM-VH7

Отзывы:

Kenwood DM-VH7, Инструкция по эксплуатации, Страница: 25 / 52

Результаты поиска

Содержание DM-VH7

Отзывы: